HondaCB650

I checked the voltage at the brushes. I am getting 12 VDC to the brushes. I can tell that the brushes are making good contact with the rotor.So can anyone tell me why I am getting 0 VAC out of the stator? Again, rotor, stator, and rectifier are all new.

I replaced all 3 components (stator, rotor, rectifier) at the same time. All new parts.

Well I used the troubleshooting guide and have the test results. Don't have a clue how to read the results. Any ideas? 1a. System VDC - @ motor off, key on _______________12.2 1b. System VDC - @ idle __________________________12.2 1c. System VDC - @ 3000RPM ______________________ 12.2 1d. System VDC...

I did some further testing. It is my understanding about how this charging system works, that 12V DC is sent to the rotor to generate the AC voltage coming out of the stator. From what I can tell, there is almost 12V DC coming out of the rectifier (checking voltage on the black and white wires where...

I really appreciate all the help, because I am about lost with this issue. Like I said before, I have used 2 different (new) stators, 2 different (new) rotors, 2 different (new) rectifiers, 2 different (new) batteries and replaced the brushes. I have checked the continuity on the rotor and stator, a...

I have replace the rotor, stator and rectifier, still not charging battery. Continuity on stator and rotor is good. Cannot get any AC voltage out of stator at 5000 RPM. I have tried 2 new stators and 2 new rotors, still nothing. I replace the brushes when I first replaced the stator. Don't know wher...