Search found 4 matches

by Lars_Erik
Sun Feb 04, 2018 3:24 pm
Forum: Technical Discussion
Topic: How to adjust fast idle speed arm?
Replies: 3
Views: 3647

Re: How to adjust fast idle speed arm?

Hi,

If you back out the idle speed adjuster screw (the one with the black plastic grip on your picture) the arm will get in contact with the throttle link. The adjustment then can take place by opening or closing the fork (the cut out on tha arm) on your picture.
by Lars_Erik
Wed Jan 10, 2018 4:10 pm
Forum: Technical Discussion
Topic: Priming of oil.
Replies: 1
Views: 2629

Priming of oil.

I have compleatly rebuild the engin (1982) and have finally filled it with oil again today. I primed it with the starter motor for approx 2 minutes without the spark plugs being installed, and get oil pressure, but see no oil at the camshaft. Does anyone know if this is normal for this engine?
by Lars_Erik
Sat Dec 30, 2017 6:54 pm
Forum: Technical Discussion
Topic: Tubes from carburator
Replies: 3
Views: 3555

Re: Tubes from carburator

Hi, tanks for prompt advise. Upon closer look i find a connection that some previous owner have intentional sealed off with a rubber cap. I presume this is the connection you
IMG_0915.jpg
IMG_0915.jpg (672.54 KiB) Viewed 3528 times
mean and that I need part 16180-460-771 and 17231-460-730 or equivalent. Does that make sense?
by Lars_Erik
Sat Dec 30, 2017 3:38 pm
Forum: Technical Discussion
Topic: Tubes from carburator
Replies: 3
Views: 3555

Tubes from carburator

I am rebuilding an CB650 SC 1982 and have a question about the two tubes pointing up from the between carb 1-2 and 3-4 carburetor. They are coming from the three way joint between the carbs. I have a US model with crank case breather hose so the connection on the air box is already taken. Are they d...

Go to advanced search