Search found 10 matches

by Steffense
Sat May 04, 2019 2:22 pm
Forum: Technical Discussion
Topic: Clutch slipping... or?
Replies: 2
Views: 587

Re: Clutch slipping... or?

Took the clutch appart and discovered the punch mark wasnt aligned up correctly with the dot underneath, causing the pressure plate not to fully engage.
Thanks for the input! Clutch is now working :-)
by Steffense
Sun Apr 28, 2019 12:20 pm
Forum: Technical Discussion
Topic: Clutch slipping... or?
Replies: 2
Views: 587

Clutch slipping... or?

Hello. On my 650sc i have a problem with the clutch.. atleast so i think. When i turn on the motor and put it in first gear and release the clutch lever, nothing happens, machine revs up fine but wont drive. When the bike is on centerstand the rear wheel will turn slowly in neutral and when in 1st g...
by Steffense
Thu Dec 06, 2018 11:31 am
Forum: Technical Discussion
Topic: 1st gear only
Replies: 8
Views: 4543

Re: 1st gear only

So my bike couldnt really shift into gear, i thought it could go into 1st but i was wrong.

I cleaned the clutch plates and allowed me to go to 1st, N and 2nd, when im turning the wheel a bit all the other gears work also, i guess this is not a uncommon issue.
by Steffense
Mon Nov 26, 2018 4:07 pm
Forum: General Discussion
Topic: CBX 650 E parts?
Replies: 10
Views: 2634

Re: CBX 650 E parts?

Im quite aware of the fact that new and proper working parts is needed, the issue for me so far is that im not sure that im able to get a license plate for and be able to drive it on the road when(if) its in proper condition. I gave about 500 dollars for the bike and until i know wether i can get th...
by Steffense
Mon Nov 26, 2018 2:57 pm
Forum: Technical Discussion
Topic: The easy way to get carbs back on.
Replies: 17
Views: 22039

Re: The easy way to get carbs back on.

Mine was totally stuck on, i used a hairdryer to soften the rubber and the ratchet to pull them off, same when i wanted them on, applying the heat did the trick for me, it was quite cold in my basement so about 5 minutes of heating and it went straight on.
by Steffense
Mon Nov 26, 2018 2:52 pm
Forum: General Discussion
Topic: CBX 650 E parts?
Replies: 10
Views: 2634

Re: CBX 650 E parts?

I presume you have already given the leaking float bowls a good sharp tap with a screwdriver handle to shock a sticky float valve loose and into position? Thanks for your inputs aswell! Will try that, one of the needles is stuck so the spring doesnt work, do you think that can cause this problem?(i...
by Steffense
Mon Nov 26, 2018 2:43 pm
Forum: Technical Discussion
Topic: 1st gear only
Replies: 8
Views: 4543

Re: 1st gear only

Totally agree. I will come back if i find a solution. Right now my bike havent been on the road for a unknown number of years, its on the centerstand i cant change the gears, as i read it might be easier if the bike is rolling. Else i will try to dismandle and clean or change the clutch and slave cl...
by Steffense
Sat Nov 24, 2018 3:51 pm
Forum: Technical Discussion
Topic: 1st gear only
Replies: 8
Views: 4543

Re: 1st gear only

Hello, did you solve this issue?
by Steffense
Sat Nov 24, 2018 7:26 am
Forum: General Discussion
Topic: CBX 650 E parts?
Replies: 10
Views: 2634

Re: CBX 650 E parts?

Thanks! Will try that.

So i put the carb back on yesterday after the cleaning, still leaking but now engine will start, got a lot of good info on this forum. Appreciate it!
by Steffense
Fri Nov 23, 2018 4:37 pm
Forum: General Discussion
Topic: CBX 650 E parts?
Replies: 10
Views: 2634

CBX 650 E parts?

Hello. I recently bought a CBX 650 E wich im struggeling a bit with, it wont start. The carbs seems to be leaking, so i want to buy new float needles since its from the overflow at carb 1+2. It seems like CBX 650 E carb repair kits arent easy to get cheap, does anybody knows if 650 CBS parts fits fo...

Go to advanced search