Search found 65 matches

by Totaled108
Mon Mar 10, 2014 8:05 pm
Forum: Bikes
Topic: 80 CB650 for sale
Replies: 14
Views: 7373

Re: 80 CB650 for sale

She is sold! Feels good and bad all at once. It love how is revved happy, and was nimble and responsive. More happy, though, with the KLR650 for my style of riding. I still have the rear rack and sissy bar, that's for you cb650, and I still have the black tank from the standard 650 that turned into ...
by Totaled108
Mon Feb 24, 2014 11:44 am
Forum: Bikes
Topic: 80 CB650 for sale
Replies: 14
Views: 7373

Re: 80 CB650 for sale

So I took the rack off again and cleaned up the slow circuit, pulling slow jets. Put it back together and fired right up. But it still won't idle without choke. Drops one of the cylinders at idle. Rode it around and it still has great power and is smooth as silk off idle. I put it back up on Craigsl...
by Totaled108
Sat Jan 25, 2014 10:32 am
Forum: Everything else
Topic: Dirt bike to enduro?
Replies: 3
Views: 4349

Re: Dirt bike to enduro?

You'll have to look up specific laws in Florida, each state may be different. Though I have seems 4stroke off road only bikes converted to be street legal. There are kits for popular bikes that this is done to. You'll generally need a rear running red light, brake light switched on my both front and...
by Totaled108
Sat Jan 11, 2014 11:59 pm
Forum: Bikes
Topic: 80 CB650 for sale
Replies: 14
Views: 7373

Re: 80 CB650 for sale

I don't want to part it out. I'd like to see it go to someone with more time on there hands then I do. It is a custom with stander end pipes. I still have the custom pipes, but they have been worked on by someone in the past that didn't do a good job of repairing the issue. Bad hole clamp to hold ev...
by Totaled108
Thu Jan 02, 2014 6:09 am
Forum: Bikes
Topic: 80 CB650 for sale
Replies: 14
Views: 7373

Re: 80 CB650 for sale

No road trip over the mountains? ;).
by Totaled108
Wed Jan 01, 2014 3:25 pm
Forum: Bikes
Topic: 80 CB650 for sale
Replies: 14
Views: 7373

Re: 80 CB650 for sale

Oops, rookie mistake.
Portland, Or.
by Totaled108
Wed Jan 01, 2014 12:02 pm
Forum: Bikes
Topic: 80 CB650 for sale
Replies: 14
Views: 7373

80 CB650 for sale

Fixing it up to run perfectly has got me ripping my hair out. So I'm just putting up a feeler thread to see if parting it out would be worth the trouble. Early spring 2013 I put new piston rings in honed cylinders, along with new valve seals. Has about 43,000 miles on the motor, ~7000 of which are p...
by Totaled108
Thu Dec 26, 2013 6:48 pm
Forum: Technical Discussion
Topic: Timing not quite right...
Replies: 7
Views: 2617

Re: Timing not quite right...

So I checked the cam visually by pulling the cam cover. It's lined up as per the manual. Yet the advancer needs full counterclockwise rotation to run at all. But now it doesn't run right at all. Boges just off idle, and it won't idle for crap, and surges and nearly dies with no input from throttle. ...
by Totaled108
Fri Dec 06, 2013 7:06 am
Forum: Technical Discussion
Topic: Timing not quite right...
Replies: 7
Views: 2617

Timing not quite right...

The pulser plate needs to be fully rotated to the rear of its adjustment to be close to the correct setting and running well. The timing mark is pointing in between the 'F' and the 'S' near the 1.4 on a warm engine. It's almost as if I were able to turn the pulsed plate further, it would run even sm...
by Totaled108
Thu Dec 05, 2013 3:32 pm
Forum: Technical Discussion
Topic: Timing not quite right...
Replies: 7
Views: 2617

Re: Timing not quite right...

That was a helpful thread. Only took 10 minutes to get the advancer off, a few oil drops, work it in and reinstall. Seems to have had a very small snag at the very start of the advancer action, but pretty smooth otherwise. After lubrication it was even smoother from rest to full advance. This howeve...
by Totaled108
Wed Dec 04, 2013 8:27 pm
Forum: Technical Discussion
Topic: Timing not quite right...
Replies: 7
Views: 2617

Timing not quite right...

So I have been riding an 80 CB650 that I had done a bit of engine and carb work and it's running well. Have gone about 7000 miles and have never got this one thing figured out. I'm having timing issues. I never really set up the timing dynamically, just statically. Here is my issue. When I was tryin...
by Totaled108
Thu Nov 28, 2013 12:17 am
Forum: Technical Discussion
Topic: Acceleration issue
Replies: 15
Views: 6749

Acceleration issue

I went through with MiGosts recommendation with regards to blocking the hole just above the air off diaphragms. It went well, I didn't have to split the rack, though had to take the main plate holding the rack together. Long story short is, I thought I have a good running nick with he tooth pick tri...
by Totaled108
Mon Nov 18, 2013 10:35 pm
Forum: Technical Discussion
Topic: Neutral Light
Replies: 8
Views: 3748

Re: Neutral Light

Did some searching all over the interwebs. Is it the small plug looking thing plugged into the harness just under the tank on the none clutch side of the frame, just behind the coil on that side?

I'll go test it when I get a chance. :)
by Totaled108
Mon Nov 18, 2013 8:43 pm
Forum: Technical Discussion
Topic: Neutral Light
Replies: 8
Views: 3748

Re: Neutral Light

I'm pretty handy with a soldering iron. I just have no idea where I need to put them, or where the silicone rectifier is. Where are they?

Thanks for the help so far. :D
by Totaled108
Fri Nov 15, 2013 2:09 pm
Forum: Technical Discussion
Topic: Neutral Light
Replies: 8
Views: 3748

Neutral Light

Along these lines, I took apart the small cam that is screwed onto the shaft that makes contact with the neutral safety switch. Cleaned all the contacts, yet still can't get the neutral light to come on when in neutral. The funny thing is, nthe neutral light comes on every time I pull the clutch lev...

Go to advanced search