HondaCB650

Hey guys. Been following the sight for quite a while now. I purchased a stock battery for my cb650c which is going to be mounted under the hump on my seat. Well the battery the guy used as a mockup was from his gsxr 600. My battery is about 2 inches too tall for the fiberglass seat to come down in p...

Will cb750 boots work for a cb650?

Thanks

Did you have to change the jets to run the pods? How does it run with the pods?

Your info has been great. Thanks guys!

Thanks Volker. That gave me some new ideas. So..... -The butterfly's should be sprung closed when cable not attached? I didn't wind either of the double springs...... Might be my problem. -on your picture the black plastic piece next to the double spring is where the choke cable attaches? Mine appea...

Hey guy. I have 79 carbs and I'm having a bit of trouble putting them back together. The issue is with the butterfly's and tension springs between the two rods. When I move the butterfly's, should they spring back? Where exactly does the choke cable hook up too? Is this hooked up correctly? The spri...

Thanks ghost. I agree.

Kinda what I'm thinking too Volker. Thanks!

Tail light and battery are installed. Tail light mounts to the battery box under the hump.

The tank had holes in it from rust. Get it repaired or purchase a new tank that I actually liked....... http://i168.photobucket.com/albums/u199/aridecommando/The%20cafe%20racer/image-4.jpg http://i168.photobucket.com/albums/u199/aridecommando/The%20cafe%20racer/image-3.jpg http://i168.photobucket.co...

Tank is sandblasted and seat cowl is taking design.

Chassis is ready to go, heading to the fiberglass guy.

I decided to cut off and extend the loop and cut out the mounting points. http://i168.photobucket.com/albums/u199/aridecommando/The%20cafe%20racer/null-10.jpg http://i168.photobucket.com/albums/u199/aridecommando/The%20cafe%20racer/null-9.jpg I had two brackets made so I could have the lift I didn't...

As I said before..... My first attempt at a rear shock mounting point. It obviously did not go so well. http://i168.photobucket.com/albums/u199/aridecommando/The%20cafe%20racer/null-18.jpg http://i168.photobucket.com/albums/u199/aridecommando/The%20cafe%20racer/null-14.jpg

I decided to keep the comstar rims. I sandblasted them, to save a few bucks before having them powder coated. Was not worth it at all. I took me over 8 hours to do, three bags of sand and only saved me $40.00. http://i168.photobucket.com/albums/u199/aridecommando/The%20cafe%20racer/image.jpg I had t...