Search found 86 matches

by Masika
Sat Feb 23, 2019 3:06 pm
Forum: Accessories and Apparel
Topic: 79` cb650 front and rear rim and tires
Replies: 0
Views: 30840

79` cb650 front and rear rim and tires

Both rims are Original and in Great shape. Both tires only have one season on them with about 3k miles. Front tire is a "RoadRider" 100/90-19 Rear tire is a "Pirelli Sport Demon" 130/90-17* This is NOT manufacturer recommended size tire but with enough research I found it fit jus...
by Masika
Tue Apr 10, 2018 7:48 pm
Forum: Technical Discussion
Topic: Go Kart wiring
Replies: 16
Views: 12270

Re: Go Kart wiring

well the heavy gauge ones were obvious ones so I was only including the 4 with the connector.
by Masika
Sun Apr 08, 2018 9:46 pm
Forum: Technical Discussion
Topic: Go Kart wiring
Replies: 16
Views: 12270

Re: Go Kart wiring

there are 4 wires coming from the solenoid, solid black, solid red, red/white and a yellow/orange. its hard to tell the 2 apart on that diagram but on my bike before anything was taken apart the red/white wire went to the R&R so using that info I sent the yellow/orange to the "switch" ...
by Masika
Sat Mar 31, 2018 9:31 pm
Forum: Technical Discussion
Topic: Go Kart wiring
Replies: 16
Views: 12270

Re: Go Kart wiring

BUMP.... ANYONE? ive got a Lincoln with your name on it!
by Masika
Mon Mar 19, 2018 3:03 am
Forum: Technical Discussion
Topic: Go Kart wiring
Replies: 16
Views: 12270

Re: Go Kart wiring

I want to use my original Key switch to kind of pay tribute to my bike, I rode that beast for 16 years after all. coming off of it is a RED, BLACK, 2 BROWNS that are tied together in the harness and a BROWN/WHITE. so in that diagram you gave me i have tied RED straight to solenoid BLACK straight to ...
by Masika
Sat Mar 17, 2018 10:20 pm
Forum: Technical Discussion
Topic: Go Kart wiring
Replies: 16
Views: 12270

Re: Go Kart wiring

Since the engine is going to be so basic is will be easiest to use pod air filters, ive heard before this creates more air flow and the carbs will need jetted, if this is true what is this process or can I just put an extra sponge over the pod to reduce the air flow?
by Masika
Sun Feb 11, 2018 1:33 am
Forum: Technical Discussion
Topic: Go Kart wiring
Replies: 16
Views: 12270

Re: Go Kart wiring

no, im pretty sure the alternator/battery powers the igniters as well.

thanks for the diagram.

I broke 7 bones, all on my left side. im fine now except for permanent metal parts in me.
by Masika
Sat Feb 10, 2018 1:55 am
Forum: Technical Discussion
Topic: Go Kart wiring
Replies: 16
Views: 12270

Go Kart wiring

In 2016 a pick up turned left in front of me and totaled me and most of the bike. (79' cb650) the engine appears to be still in tact and id like to build one of those R1 go karts . So my question is, what are the bare necessity wires I need. I pretty much have the charging system down pack since ive...
by Masika
Mon Feb 13, 2017 7:25 pm
Forum: General Discussion
Topic: No turning back...
Replies: 3
Views: 6840

No turning back...

wrecked my bike back in sept. had an f150 turn left in front of me and it was a dead stop. I broke 7 bones and am now full of titanium! luckily I dont remember anything past squeezing my front brake.... anyway. insurance company finally gave me back the bike its well mangled but was a very good bike...
by Masika
Sun Jun 26, 2016 3:32 am
Forum: Technical Discussion
Topic: For those who've done the R/R mod
Replies: 0
Views: 17714

For those who've done the R/R mod

I did the R/R mod about 3 years ago with the vr295 regulator. end of last year the regulator died... which then spiked the voltage and killed one of my ignitors. replaced both and it just happened again last week. vr295 regulator died, spiked voltage and killed ignitor. It always kills same ignitor....
by Masika
Thu Mar 17, 2016 1:07 am
Forum: Technical Discussion
Topic: Possible short
Replies: 1
Views: 3099

Re: Possible short

Okay, so ive concluded the short is in the regulator, I did the mod a few years ago so I have one of those $15 regulators from a chevy but my theory is I had a bad battery that wasnt dampening the charge properly while running so it overloaded the regulator. Was in the process of getting a new batte...
by Masika
Wed Mar 16, 2016 12:21 pm
Forum: Technical Discussion
Topic: Possible short
Replies: 1
Views: 3099

Possible short

Bike died on the highway, trucked it home, found out one of the igniters was "fried" replaced it and it happened again as soon as i turned the key, now (with key on or off doesnt make a difference) but the kill switch in the on position I have continuity between the green wire and both the...
by Masika
Wed Nov 18, 2015 10:34 pm
Forum: Technical Discussion
Topic: cdi/tpi/ transistorized Kettering system.
Replies: 4
Views: 4464

Re: cdi/tpi/ transistorized Kettering system.

I agree but when they are $100 for a used set i'd rather replace what Honda thought was necessary.
by Masika
Wed Nov 18, 2015 6:41 pm
Forum: Technical Discussion
Topic: cdi/tpi/ transistorized Kettering system.
Replies: 4
Views: 4464

cdi/tpi/ transistorized Kettering system.

whatever it is you want to call it... one of them has gotten warm enough over time all the "black goo" is gone, is there a preferred substance to use and replace the black goo?
by Masika
Sat Jun 07, 2014 10:43 am
Forum: Technical Discussion
Topic: clutch slipping.
Replies: 3
Views: 3273

Re: clutch slipping.

I have not, thats what I was wondering if there was such an option. Ill look in the manual .

Go to advanced search