Search found 64 matches

by Hutch1
Sun Feb 16, 2014 2:51 pm
Forum: Technical Discussion
Topic: New restoration
Replies: 13
Views: 6823

Re: New restoration

When I brought her home... https://lh3.googleusercontent.com/-RN5DA_hvlEw/UwDjY930AtI/AAAAAAAAAbU/v0tu9hvQLBY/w737-h553-no/P2090057.JPG https://lh6.googleusercontent.com/-I48bC0V8ArU/UwDj8BAe8TI/AAAAAAAAAcE/ie042Cw_HWk/w737-h553-no/P2090063.JPG https://lh4.googleusercontent.com/-D3I3kBuVZlg/UwDkO0Te...
by Hutch1
Sun Feb 16, 2014 10:24 am
Forum: Technical Discussion
Topic: New restoration
Replies: 13
Views: 6823

Re: New restoration

First problem solved by completely removing the pinch bolt, the second with an impact wrench. Looks like one of the wire harness connectors to the regulator/rectifier was changed by the PO (see the wires in the photo), and its in rough shape. Any thoughts on whether this can be replaced short of a n...
by Hutch1
Sun Feb 16, 2014 5:51 am
Forum: Technical Discussion
Topic: New restoration
Replies: 13
Views: 6823

Re: New restoration

Figured out the front axle, it was as simple as removing the pinch bolt completely :o. Here's a picture of the lock nut on the swingarm pivot, it appears to be 24mm. It's not budging at all. https://lh6.googleusercontent.com/-XDi0bdNZ_GM/UwCU9wsBiGI/AAAAAAAAAaA/gxprMAifpkY/w680-h510-no/CAM00456.jpg
by Hutch1
Sat Feb 15, 2014 6:12 pm
Forum: Technical Discussion
Topic: New restoration
Replies: 13
Views: 6823

New restoration

I've begun a restoration of my 1982 CB650SC and hit a couple minor snags. First off, I can remove the front through axle from the fork. It spins freely, and is completely free of the left side of the fork, put I cannot pull it through the right fork lower. Second, I cannot loosen the lock nut on the...

Go to advanced search