My new-to-me CB650Z ....
My new-to-me CB650Z ....
Greetings fellow CB650 types, new member here
Having once had a CB650Z brand new, many moons ago, what happens but my older brother buys one a while ago .
He abuses her (well, not really - but just doesn't care for her as well as I would!) so I bought her off him.
Here she is, as I do a few jobs to get her back on the road:
Leaking fork seals are not her only problems - but I hope to get her back on the road quite soon .
Martin. (Oxfordshire, UK)
Having once had a CB650Z brand new, many moons ago, what happens but my older brother buys one a while ago .
He abuses her (well, not really - but just doesn't care for her as well as I would!) so I bought her off him.
Here she is, as I do a few jobs to get her back on the road:
Leaking fork seals are not her only problems - but I hope to get her back on the road quite soon .
Martin. (Oxfordshire, UK)
Re: My new-to-me CB650Z ....
Welcome here!
Good luck for getting her together! Looks like you are a supporter of the belt and suspenders technique. But I see that the usual way won't work with that exhaust.
Good luck for getting her together! Looks like you are a supporter of the belt and suspenders technique. But I see that the usual way won't work with that exhaust.
Cosky's great (free) online manual: http://cosky0.tripod.com
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
Re: My new-to-me CB650Z ....
Hi Martin, welcome. Plenty of help and advice around here if you need it,
Phil
Phil
Re: My new-to-me CB650Z ....
Thanks for the welcome, folks. Mighty chilly here at the moment & the dark evenings mean I haven't got as much done as I should have done.
She's out of the shed now, making room for one of my other steeds - but I have:
Completed the fork seals.
Done the tappets.
Put a replacement horn on her.
Replaced the tired old choke cable.
Balanced the carbs.
Fitted new plugs & air filter & done an oil & oil filter change.
She's running quite nicely, though will only tick over a little on the high side (about 1600rpm) so what she really needs is a good ride out on the open road . Got to wait for an MOT inspection 1st though, and to fix the headlight & indicators
Won't be long, though. I feel I've yet to contribute much to this great site, but once I'm doing less fettling, I'll have more time. (Unless I'm out riding her, of course .
Martin.
She's out of the shed now, making room for one of my other steeds - but I have:
Completed the fork seals.
Done the tappets.
Put a replacement horn on her.
Replaced the tired old choke cable.
Balanced the carbs.
Fitted new plugs & air filter & done an oil & oil filter change.
She's running quite nicely, though will only tick over a little on the high side (about 1600rpm) so what she really needs is a good ride out on the open road . Got to wait for an MOT inspection 1st though, and to fix the headlight & indicators
Won't be long, though. I feel I've yet to contribute much to this great site, but once I'm doing less fettling, I'll have more time. (Unless I'm out riding her, of course .
Martin.
Re: My new-to-me CB650Z ....
M40Man wrote:... so what she really needs is a good ride out on the open road .
Yes, that will often solve some minor running problems after standing for a while. Seems like you did good progress at the important things. I am optimistic that it will just run fine. If not done already, also have a look into the tank before you seriously start riding.
Cosky's great (free) online manual: http://cosky0.tripod.com
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
Re: My new-to-me CB650Z ....
Unlike the day I got it my bike now idles around 990- 1000rpm quite nicely.
The carbs are very prone to getting clogged after long time setting and rust in the tank is also a large problem along with rust getting in to the fuel shutoff valve and the fuel petcock.
have you tried to turn the idle down ?
and are you sure you don't have the choke out of adjustment? it can cause the bike to idle to high.
if it runs rough and won't run at less that the 1600 rpm the ride along with some carb cleaner could do a world of good for the bike they all need a good blowing out now and then.
The carbs are very prone to getting clogged after long time setting and rust in the tank is also a large problem along with rust getting in to the fuel shutoff valve and the fuel petcock.
have you tried to turn the idle down ?
and are you sure you don't have the choke out of adjustment? it can cause the bike to idle to high.
if it runs rough and won't run at less that the 1600 rpm the ride along with some carb cleaner could do a world of good for the bike they all need a good blowing out now and then.
A>
<A
<A
Re: My new-to-me CB650Z ....
I think the choke is good, Arcangel. Took her out on the road in atrocious wind & rain for the first ride today. (I Was taking her for her MOT test!). Pleased to say she passed - no problems.arcangel wrote:... and are you sure you don't have the choke out of adjustment?
Was a bit stuttery, not too bad though. I didn't go above 50mph though - the conditions didn't allow it. She handled the flooded backroads fine though . If it's drier tomorrow I'll take her some beans & blow the cobwebs away. I'll see how she runs then, & tinker a bit more if need be.
Not a pristine example, but I think she's quite pretty now:
Re: My new-to-me CB650Z ....
Glad to here.
My bike doesn't do well in wet weather at all , I think it is time to replace the tires
they must be getting a little hard they don't seam to grip very well at all.
I only takes a little and the rear wheel starts slipping on 1-3 gears so gess I need to spring for the new tires.
My bike doesn't do well in wet weather at all , I think it is time to replace the tires
they must be getting a little hard they don't seam to grip very well at all.
I only takes a little and the rear wheel starts slipping on 1-3 gears so gess I need to spring for the new tires.
A>
<A
<A
Re: My new-to-me CB650Z ....
Riding with changing loads and revs often improves the engine running characteristics significantly. But I guess it is not the season for that now. I remember I got a completely different engine after the first extended a bit faster turn after winter when I still did ride it through the complete year.
Looks good, your headlight seems to be directed somewhat to the sky?
Looks good, your headlight seems to be directed somewhat to the sky?
Cosky's great (free) online manual: http://cosky0.tripod.com
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
Re: My new-to-me CB650Z ....
ya needs adjustment like mine.
I still have not got it the way it was before I crashed it.
I still have not got it the way it was before I crashed it.
A>
<A
<A
Re: My new-to-me CB650Z ....
Hi all, another new member here.
I have just purchased the bike shown in this link from member 'M40MAN' and he told me about this forum.
Martin did lots of work to her and now she runs great, just need a few things to get her to my liking and i'll be really happy.
Regards
Clive. Peterborough, UK
I have just purchased the bike shown in this link from member 'M40MAN' and he told me about this forum.
Martin did lots of work to her and now she runs great, just need a few things to get her to my liking and i'll be really happy.
Regards
Clive. Peterborough, UK
Re: My new-to-me CB650Z ....
Welcome here!
You may like to place new pics here after the changes you intend to do.
You may like to place new pics here after the changes you intend to do.
Cosky's great (free) online manual: http://cosky0.tripod.com
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
Re: My new-to-me CB650Z ....
welcome from Indiana cam7777
hope to see you on the forum a lot in the up coming months.
hope to see you on the forum a lot in the up coming months.
A>
<A
<A
Re: My new-to-me CB650Z ....
http://uk.youtube.com/watch?v=gq-EiRF0gKQ
Took a quick video of the CB today, just before going for a ride.
Took a quick video of the CB today, just before going for a ride.
Who is online
Users browsing this forum: No registered users and 33 guests