Hi. This oil gallery plug has a hex centre the same as an Allen Key.
I have measured it with a pair of calipers and I make it 12.4mm flat to flat.
Anyone know the correct size and has it been hard to get out.
Its item number 3. top centre.
PLUG B, OIL PATH CB650 1979 (Z)
- Shoestring-uk
- Posts: 41
- Joined: Fri Aug 05, 2016 1:56 pm
- Location: Devon. UK
PLUG B, OIL PATH CB650 1979 (Z)
- Attachments
-
- Item number 3
- Untitled.jpg (121.69 KiB) Viewed 5722 times
Re: PLUG B, OIL PATH CB650 1979 (Z)
I think you should get it out with a 12mm Allen key.
You may make a tiny steel plate to shim a possible gap so you get it out safe without damage.
It should come out easily, it is just a plug with an O-ring. At least I don't remember trouble there.
I won't be surprised if it already would come out with a large screwdriver (and possibly something else like a nut into the hex hole if required for blocking it). Worth a careful try, but don't try to force it that way.
You may make a tiny steel plate to shim a possible gap so you get it out safe without damage.
It should come out easily, it is just a plug with an O-ring. At least I don't remember trouble there.
I won't be surprised if it already would come out with a large screwdriver (and possibly something else like a nut into the hex hole if required for blocking it). Worth a careful try, but don't try to force it that way.
Cosky's great (free) online manual: http://cosky0.tripod.com
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
- Shoestring-uk
- Posts: 41
- Joined: Fri Aug 05, 2016 1:56 pm
- Location: Devon. UK
Re: PLUG B, OIL PATH CB650 1979 (Z)
Many thanks for your reply but this little devil is stuck fast.
Think i may have to use heat on the alloy.
Dave
Think i may have to use heat on the alloy.
Dave
Re: PLUG B, OIL PATH CB650 1979 (Z)
Heat usually is a good idea but be careful there. Especially if there should be traces of "ground contact" at the bottom.
Possibly worth to consider if you really need to have it out.
Possibly worth to consider if you really need to have it out.
Cosky's great (free) online manual: http://cosky0.tripod.com
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
Return to “General Discussion”
Who is online
Users browsing this forum: No registered users and 34 guests