I’m back

General motorcycle conversation

Moderators: Volker_P, tidd650

User avatar
dstaff
Posts: 16
Joined: Thu Jul 17, 2014 4:12 pm
Location: Ottawa, ON Canada

I’m back

Postby dstaff » Wed Sep 20, 2017 8:53 pm

Well I’ve been away from this forum for some time.. I sold my CB650C after my first season and moved up to a CB750C... which I promptly sold the next year, and bought a CB900C project bike. (Which unfortunately never made it back on the road. Just got a little overwhelmed with the project, and now because I’m moving to a smaller house, don’t have the room to keep all my bikes.*my daily rider is a 2014 Honda CTX700N, while dependable it’s not the same as a CB four. So.. I just made deal and traded the CB900C and a parts bike for a 1980 CB650. (Not a CB650C this time)

It’s still going to need some work but nothing like the 900. Was surprised to see pods on it.. but the carbs don’t look same as what was on my 650C and it came with the wrong tank. The tank is for a Custom, but the rubber frame tabs don’t line up so may be looking for a new tank soon. Or see if I can get the mount points moved.. there is also the usual signs of neglect. Tires are shot, and the throttle and clutch cables are seized.

But I’m excited about getting this bike up and running. I/ve missed my CB650..
2014 Honda CTX700N - Copernicus
1982 Honda CB900C (future "mild cafe racer")
1980 Honda CB650 (Restoration Project)

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: I’m back

Postby Folsoml » Thu Sep 21, 2017 5:20 am

Welcome back, Dean!

The 1979 and 1980 had different carbs that the CV carbs you are used to. The good news is the mechanical slide carbs actually CAN be made to work with the pods.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

User avatar
dstaff
Posts: 16
Joined: Thu Jul 17, 2014 4:12 pm
Location: Ottawa, ON Canada

Re: I’m back

Postby dstaff » Thu Sep 21, 2017 7:04 am

Thanks Larry.

Good to know. Was afraid I would have to start hunting for an air box.
Now to figure out a solution for the mismatched tank.

Dean
2014 Honda CTX700N - Copernicus
1982 Honda CB900C (future "mild cafe racer")
1980 Honda CB650 (Restoration Project)

User avatar
GeorgeSweety
Posts: 462
Joined: Tue Aug 08, 2017 11:47 am
Location: UK.

Re: I’m back

Postby GeorgeSweety » Thu Sep 21, 2017 7:20 am

Hi Dean and welcome back. I have found a good source of info for the slide carbs should you need it, any info is better than no info to me. Good luck with your new project :)
http://www.motopsyco.com/2013/08/09/vin ... -overhaul/

User avatar
dstaff
Posts: 16
Joined: Thu Jul 17, 2014 4:12 pm
Location: Ottawa, ON Canada

Re: I’m back

Postby dstaff » Fri Sep 22, 2017 11:53 am

Thanks George.
Appreciate the information. Got it bookmarked.
2014 Honda CTX700N - Copernicus
1982 Honda CB900C (future "mild cafe racer")
1980 Honda CB650 (Restoration Project)


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 29 guests