Page 1 of 1

Left hand high/low beam,indercater assembly

Posted: Fri Nov 02, 2018 7:03 pm
by The-Inspector
I am looking for a left hand high/low beam, blinker, horn assembly for my 1981 cb650 special, dose anyone have a link where i can get one?
Thanks guys.... Peter.

Re: Left hand high/low beam,indercater assembly

Posted: Fri Nov 02, 2018 7:07 pm
by themaddrebel
Ill.check my 80 out back, when I redo it, it won't have nothing but head light,tail and brake light

Sent from my SM-G955U using Tapatalk

Re: Left hand high/low beam,indercater assembly

Posted: Fri Nov 02, 2018 7:10 pm
by The-Inspector
Soundg great....

Re: Left hand high/low beam,indercater assembly

Posted: Sun Nov 04, 2018 12:49 pm
by themaddrebel
Is this what you need?Image

Sent from my SM-G955U using Tapatalk

Re: Left hand high/low beam,indercater assembly

Posted: Sun Nov 04, 2018 10:00 pm
by The-Inspector
That's what I need, Mine has a crack right accross the top of it......

Re: Left hand high/low beam,indercater assembly

Posted: Sun Nov 04, 2018 10:25 pm
by themaddrebel
Ok, I did not look close at it, do the wires through the bars? Do you need the wiring, is it easy to remove it?

Sent from my SM-G955U using Tapatalk

Re: Left hand high/low beam,indercater assembly

Posted: Mon Nov 05, 2018 7:22 am
by Folsoml
It's pretty easy to get off. Three screws on the actual part itself and it comes off. The wiring is not inside the bars. It runs down the handlebar and plugs into the wiring harness inside the headlight bucket. You will need to remove the headlight to get to the plug.

Re: Left hand high/low beam,indercater assembly

Posted: Mon Nov 05, 2018 7:30 am
by themaddrebel
Thanks, I can do that tonite. I know my Harley the wiring runs through the bars

Sent from my SM-G955U using Tapatalk

Re: Left hand high/low beam,indercater assembly

Posted: Tue Nov 06, 2018 5:30 am
by The-Inspector
How much $ do you want for the compleat assembly?

Re: Left hand high/low beam,indercater assembly

Posted: Tue Nov 06, 2018 6:56 am
by themaddrebel
30 bucks too much? If you are in the 48 states, I'll pay shipping

Sent from my SM-G955U using Tapatalk

Re: Left hand high/low beam,indercater assembly

Posted: Sat Nov 10, 2018 7:05 am
by The-Inspector
Sorry for the delay, I dont get much time for myself these days, 30 $ is fine, and yes i live in CT, how do we arrange payment?

Re: Left hand high/low beam,indercater assembly

Posted: Sat Nov 10, 2018 7:41 am
by themaddrebel
PayPal is good. I need a mailing address.

Hiwaybikertrash@yahoo.com is my PayPal

Sent from my SM-G955U using Tapatalk