Could someone leme borrow two screws for a carb bowl cover and the two rear mounting bolts and hi front mount bolt?!? 1982 cb650
One bowl had a water leak and (after sitting for 20 years rusted into the carb). Th front top and bottom rear mount bolts were missing
Bolts and screws needed!
Re: Bolts and screws needed!
You can pick these up at the local hardware store. Just take samples in so you'll know what size you need.
Have a problem with your CB650? Have a technical question? Click here!
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
-
- Posts: 98
- Joined: Tue Apr 30, 2013 8:54 pm
Re: Bolts and screws needed!
home depot AND lowes didnt carry the proper length for rear bolts i looked. ill check LA sometime.
Re: Bolts and screws needed!
PM me your address.
I replace all the screws with SS when I do a set so I have a zillion of the crappy screws that came stock. I'll send you a few
This is a source of a cheap kit with ALL the special o-rings you need for your carbs. He will also sell you ALL the screws you need to convert to SS cap screws
Sean Grier
934 Merea Ln
Sultan, WA 98294
Phone (206) 612-0266
E-Mail: shgrier @ earthlink.net
I replace all the screws with SS when I do a set so I have a zillion of the crappy screws that came stock. I'll send you a few
This is a source of a cheap kit with ALL the special o-rings you need for your carbs. He will also sell you ALL the screws you need to convert to SS cap screws
Sean Grier
934 Merea Ln
Sultan, WA 98294
Phone (206) 612-0266
E-Mail: shgrier @ earthlink.net
Re: Bolts and screws needed!
salzig hund wrote:home depot AND lowes didnt carry the proper length for rear bolts i looked. ill check LA sometime.
That's odd. Sometimes I'll cut bolts to the proper length with a Dremel tool.
The source cgswss10 mentioned above is good. I get all my O rings from Sean--and he ships a complete set (with spares) for just $5.
Have a problem with your CB650? Have a technical question? Click here!
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
-
- Posts: 98
- Joined: Tue Apr 30, 2013 8:54 pm
Re: Bolts and screws needed!
I emailed him. Yeah, if they had a set that was long enough to match the rear bolts. the closest is off by an inch... I didn't ask if they could call the next town branches, but a bolt is an easy find. Thought I'd ask if anyone had a spare. Of to LA next weekend.
Return to “General Discussion”
Who is online
Users browsing this forum: No registered users and 20 guests