Flasher are not flashing

If it's broken or just needs tweaked

Moderators: Volker_P, tidd650

mgendron
Posts: 8
Joined: Fri Aug 02, 2019 9:13 pm

Flasher are not flashing

Postby mgendron » Mon Aug 19, 2019 2:54 pm

Hi, I have a cb 650 1980 that I am rebuilding - I had electrical problem but now all is fix.

My problem now is that my flasher lights are working but not flashing - is there a specific wire I need to connect it to?

User avatar
GeorgeSweety
Posts: 462
Joined: Tue Aug 08, 2017 11:47 am
Location: UK.

Re: Flasher are not flashing

Postby GeorgeSweety » Mon Aug 19, 2019 4:22 pm

Could you be a bit more specific, are you using original Honda parts? is it all of your flasher lights or just the front or the rear? Pictures might help.

mgendron
Posts: 8
Joined: Fri Aug 02, 2019 9:13 pm

Re: Flasher are not flashing

Postby mgendron » Sat Aug 24, 2019 7:27 pm

Original on the bike wires but the flasher, the front light and the speedometer are new - but even with all original they do not flash.

Efferdy
Posts: 19
Joined: Tue May 29, 2018 1:35 am

Re: Flasher are not flashing

Postby Efferdy » Tue Aug 27, 2019 5:24 pm

Have you ever figured it out? Might be better if you have a wiring diagram.

mgendron
Posts: 8
Joined: Fri Aug 02, 2019 9:13 pm

Re: Flasher are not flashing

Postby mgendron » Fri Aug 30, 2019 5:09 pm

GeorgeSweety wrote:Could you be a bit more specific, are you using original Honda parts? is it all of your flasher lights or just the front or the rear? Pictures might help.


I did respond to your message and still have not figure it out

User avatar
GeorgeSweety
Posts: 462
Joined: Tue Aug 08, 2017 11:47 am
Location: UK.

Re: Flasher are not flashing

Postby GeorgeSweety » Sat Aug 31, 2019 2:49 am

So you are using "aftermarket" flashers? Somebody else recently had a problem with aftermarket flashers that would not flash. The solution was to change the bulbs in the aftermarket flashers for the original Honda bulbs, the bulbs in the aftermarket flashers were the wrong wattage or whatever its called, I don't really understand electrics :(


Return to “Technical Discussion”

Who is online

Users browsing this forum: No registered users and 12 guests