Size of steering stem nut
Size of steering stem nut
Anyone happen to know the part number for the 83 650 steering stem locknut? It's the one with the four prongs to loosen and tighten the steering stem bearings. Also, could the same tool be used for the seingarm? Thanks.
1983 CB650SC Nighthawk
Re: Size of steering stem nut
Here is a link to the parts fiche for the steering stem.
http://www.partzilla.com/parts/search/Honda/Motorcycle/1983/CB650SC+A/STEERING+STEM+%2B+FUSE/parts.html
http://www.partzilla.com/parts/search/Honda/Motorcycle/1983/CB650SC+A/STEERING+STEM+%2B+FUSE/parts.html
Have a problem with your CB650? Have a technical question? Click here!
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
Re: Size of steering stem nut
I'm looking for the tool to remove the nut. It's a specialized Honda tool I guess. People grind down ratchets in order to make them.
1983 CB650SC Nighthawk
Re: Size of steering stem nut
Never mind. I found a convo we had a few weeks ago about this exact same thing. Hodor! Thanks bro.
Edit: it would be nice to get confirmation on the size of the stem nut though. I can't find a 30x32 locknut only one or the other. I'd rather not spend 80 dollars on two if I can just buy one and be done with it. So is the stem 30 or 32? I'm trying to line my ducks up so I can also put progressive springs up front while I have the forks off the bike. Thanks guys.
Edit: it would be nice to get confirmation on the size of the stem nut though. I can't find a 30x32 locknut only one or the other. I'd rather not spend 80 dollars on two if I can just buy one and be done with it. So is the stem 30 or 32? I'm trying to line my ducks up so I can also put progressive springs up front while I have the forks off the bike. Thanks guys.
1983 CB650SC Nighthawk
Return to “Technical Discussion”
Who is online
Users browsing this forum: No registered users and 48 guests