any tips for connecting the airbox to the carburetors?

If it's broken or just needs tweaked

Moderators: Volker_P, tidd650

User avatar
Chiefrupp
Posts: 20
Joined: Thu Dec 17, 2015 10:36 pm

any tips for connecting the airbox to the carburetors?

Postby Chiefrupp » Thu Jan 07, 2016 9:37 pm

Any tips would be helpful. Right now I am trying to connect the two and having a very difficult time

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: any tips for connecting the airbox to the carburetors?

Postby Folsoml » Fri Jan 08, 2016 5:35 am

I've had the best luck when I connect the two before the carbs are fully seated in the head.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

cb650
Posts: 2959
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: any tips for connecting the airbox to the carburetors?

Postby cb650 » Fri Jan 08, 2016 5:58 am

Threads on using ratchet straps to pull back the airbox are here somewhere. It keeps from distorting the rubber so much.
Did you clean the tank out?!?!?!?!

User avatar
tario
Posts: 166
Joined: Sat Mar 07, 2015 2:26 pm

Re: any tips for connecting the airbox to the carburetors?

Postby tario » Sun Jan 10, 2016 1:50 pm

I found a long flat head screwdriver helped get the airbox hooked around the carbs. There should be hose clamps to tighten everything up. I had the airbox in when I put my carbs in. It took a lot of wiggling.

What specifically is the hangup?
1979 cb650
1980 cb650

CB650CPastor
Posts: 36
Joined: Sat Sep 12, 2015 1:43 pm
Location: Gaithersburg, Maryland
Contact:

Re: any tips for connecting the airbox to the carburetors?

Postby CB650CPastor » Wed Jan 13, 2016 10:27 pm

A little Vaseline on the inside lip of the boots helps.
Tim
Current:1980 Honda CB650C Custom, 1969 Toyota Corona Deluxe Sedan
Past: '07 Honda Rebel 250, '80 Yamaha XS1100 Special, '69 Honda CB160, '67 K15 Suzuki Hillbilly

TheGrimReaper
Posts: 6
Joined: Tue Jan 12, 2016 8:23 pm
Location: Henderson, NC

Re: any tips for connecting the airbox to the carburetors?

Postby TheGrimReaper » Thu Jan 14, 2016 7:11 pm

I'm having the same issue. I have a 81 CB650 Custom that im restoring and I found the part on ebay pretty cheap.


Return to “Technical Discussion”

Who is online

Users browsing this forum: Appie, Google [Bot] and 40 guests