I have one head bolt that wont come out
-
- Posts: 87
- Joined: Tue May 17, 2016 9:56 am
I have one head bolt that wont come out
On my 79 650.I got all 12 loosened.11 came out with a stick magnet to reach down in the holes.The last one is very loose also, you can turn the head easily.It will not lift out.I got the magnet,no work,I bought a magnet with a basket type grabber on it.I can turn the bolt with the grabber.It won't lift out of the head.I can not figure out what to do now.If I had snapped it off, the loose turning part should lift out it seems.The motor is locked up,that is why i was trying to take it apart.I can not rotate the motor to at least loosen and remove the cam.Any ideas?
Owner of 79 cb650.Non running.Current bike 2004 heritage softail. Denton Texas
Re: I have one head bolt that wont come out
1. Clean the bolt head from oil and grease.
2. Soak a thin sheet of paper in Loctite.
3. Cover the bolt head with the paper.
4. Press the 12mm socket on it.
5. Wait for a while (until Loctite is hard).
6. Pull the socket with the bolt.
7. Report here if it worked (never tried this there).
Make a dry test to find a suitable paper first. If you are lucky, it even pulls out with the paper alone.
2. Soak a thin sheet of paper in Loctite.
3. Cover the bolt head with the paper.
4. Press the 12mm socket on it.
5. Wait for a while (until Loctite is hard).
6. Pull the socket with the bolt.
7. Report here if it worked (never tried this there).
Make a dry test to find a suitable paper first. If you are lucky, it even pulls out with the paper alone.
Cosky's great (free) online manual: http://cosky0.tripod.com
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
forum links to common technical issues
If you really like this site and you would not like to see it vanish soon, have a look there: Urgent: Future of HondaCB650.com Forum
-
- Posts: 87
- Joined: Tue May 17, 2016 9:56 am
Re: I have one head bolt that wont come out
Volker_P wrote:1. Clean the bolt head from oil and grease.
2. Soak a thin sheet of paper in Loctite.
3. Cover the bolt head with the paper.
4. Press the 12mm socket on it.
5. Wait for a while (until Loctite is hard).
6. Pull the socket with the bolt.
7. Report here if it worked (never tried this there).
Make a dry test to find a suitable paper first. If you are lucky, it even pulls out with the paper alone.
sounds genius to me
Owner of 79 cb650.Non running.Current bike 2004 heritage softail. Denton Texas
Return to “Technical Discussion”
Who is online
Users browsing this forum: No registered users and 37 guests