Hi All
I've been piling on the miles this summer and one thing that I need to fix over the winter is a clutch issue, so before I strip it down, just want to check your collective thoughts.
The problem is - The clutch does not fully disengage when the level is pulled in. I've adjusted both ends to the limit (the cable was new 2 years ago), so is this a symptom to worn clutch plates? or is there likely to be wear in the release mechanism? There is no wear in the clutch are pivot bearing.
thoughts please
Jim
Clutch question
Re: Clutch question
There is a adjustment in the case. The "plug" on the center allows assess to the adjuster. Its in the manuals
Did you clean the tank out?!?!?!?!
Re: Clutch question
Yep. What CB650 said. ^^^
Have a problem with your CB650? Have a technical question? Click here!
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
Re: Clutch question
thanks both
I have to admit I've never adjusted it there even after the engine build, great as I didn't want to open the engine up
cheers
jim
I have to admit I've never adjusted it there even after the engine build, great as I didn't want to open the engine up
cheers
jim
Return to “Technical Discussion”
Who is online
Users browsing this forum: Google [Bot] and 56 guests