Air cleaner lines.

If it's broken or just needs tweaked

Moderators: Volker_P, tidd650

CDMac
Posts: 3
Joined: Mon Jun 19, 2017 12:59 pm

Air cleaner lines.

Postby CDMac » Wed Aug 02, 2017 6:40 pm

I can't seem to figure out where this line connects.

Image


Sent from my iPhone using Tapatalk

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Air cleaner lines.

Postby Folsoml » Thu Aug 03, 2017 5:06 am

I can't tell what the other end is connected to. There is a line that goes from the bottom rear side of the airbox and leads to a waste collection box. Any oil that collects in the airbox drains out of this tube into the waste collector.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

cb650
Posts: 2959
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: Air cleaner lines.

Postby cb650 » Thu Aug 03, 2017 6:22 am

looks like the crankcase vent. Should route up the middle to the center rocker cover.
Did you clean the tank out?!?!?!?!

CDMac
Posts: 3
Joined: Mon Jun 19, 2017 12:59 pm

Re: Air cleaner lines.

Postby CDMac » Fri Aug 04, 2017 5:11 pm

It's item 8. Connects to the bottom of air box. I can't figure where the top connects. There is another line that connects to the head.

Image


Sent from my iPhone using Tapatalk

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Air cleaner lines.

Postby Folsoml » Fri Aug 04, 2017 8:32 pm

CB650 was right. It connects to the center rocker box cover.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

CDMac
Posts: 3
Joined: Mon Jun 19, 2017 12:59 pm

Re: Air cleaner lines.

Postby CDMac » Sat Aug 05, 2017 9:50 am

But that's this one.

Folsoml wrote:CB650 was right. It connects to the center rocker box cover.

Image



Sent from my iPhone using Tapatalk


Return to “Technical Discussion”

Who is online

Users browsing this forum: Google [Bot] and 39 guests