1081 cb650 carbs

If it's broken or just needs tweaked

Moderators: Volker_P, tidd650

Marcomotorbike
Posts: 3
Joined: Sat Apr 16, 2016 7:04 pm

1081 cb650 carbs

Postby Marcomotorbike » Sat Sep 16, 2017 3:52 pm

So I cleaned my carbs in my ultrasonic cleaner and it did an amazing job, rebuilt them with brand new jets gaskets etc
When I emptied my tank later I found this brass plug and 1 ball bearing in the dirt at the bottom so I wondered if anyone knows where they might go? Nothing shows up in either my Clymer or oem Honda manual.
Stock Keihin carbs on a 1981.
Greatly appreciate any feedback?
Attached a photo ball is about 2mm square plug maybe 3mm with a round bit on one side
Attachments
IMG_6465.JPG
IMG_6465.JPG (721.14 KiB) Viewed 437 times

User avatar
Folsoml
Posts: 1436
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: 1081 cb650 carbs

Postby Folsoml » Sat Sep 16, 2017 6:28 pm

That is part of the accelerator pump. This is not my picture, but the black arrow is pointing to the brass part. The ball bearing is under the brass piece. This is on the float bowl of the #2 carb.

carb14_4.JPG
carb14_4.JPG (171.18 KiB) Viewed 433 times
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

Marcomotorbike
Posts: 3
Joined: Sat Apr 16, 2016 7:04 pm

Re: 1081 cb650 carbs

Postby Marcomotorbike » Sat Sep 16, 2017 8:44 pm

I thought it might be from the odd carb of the rack but couldn't see where because everything was bright and clean
Many many thanks, this forum rocks!

User avatar
Folsoml
Posts: 1436
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: 1081 cb650 carbs

Postby Folsoml » Sat Sep 16, 2017 9:27 pm

8) 8) 8)
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,


Return to “Technical Discussion”

Who is online

Users browsing this forum: Bing [Bot] and 16 guests