Starter Clutch Replacement

If it's broken or just needs tweaked

Moderators: Volker_P, tidd650

User avatar
tidd650
Site Admin
Posts: 38
Joined: Fri Aug 28, 2009 12:07 am

Starter Clutch Replacement

Postby tidd650 » Wed Nov 29, 2017 2:05 am

1981 Honda CB650 Starter Clutch Replacement.pdf
(12.6 MiB) Downloaded 140 times

User avatar
Folsoml
Posts: 1621
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Starter Clutch Replacement

Postby Folsoml » Wed Nov 29, 2017 5:55 am

Thanks to Stellarfoxy for creating this!
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

CB650CPastor
Posts: 36
Joined: Sat Sep 12, 2015 1:43 pm
Location: Gaithersburg, Maryland
Contact:

Re: Starter Clutch Replacement

Postby CB650CPastor » Thu Jul 19, 2018 8:43 am

Great write-up!

One correction (and suggestion) to step 20. The internal thread size of the main shaft is actually 12mm x 1.25 (not 1.50 as stated) and the best way to remove it is with a slide hammer threaded into the shaft. I made a fitting for my slide hammer by welding a coupling nut (to fit the shaft of the slide hammer) to a 12mm x 1.25 hex bolt (to thread into the main shaft end internal threads). A few easy taps and it's out. No need to struggle with trying to tug it out.
Tim
Current:1980 Honda CB650C Custom, 1969 Toyota Corona Deluxe Sedan
Past: '07 Honda Rebel 250, '80 Yamaha XS1100 Special, '69 Honda CB160, '67 K15 Suzuki Hillbilly

User avatar
Folsoml
Posts: 1621
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Starter Clutch Replacement

Postby Folsoml » Thu Jul 19, 2018 5:45 pm

Good stuff! Thanks for the correction.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,


Return to “Technical Discussion”

Who is online

Users browsing this forum: No registered users and 25 guests