Tubes from carburator

If it's broken or just needs tweaked

Moderators: Volker_P, tidd650

Lars_Erik
Posts: 4
Joined: Mon Sep 18, 2017 1:29 am

Tubes from carburator

Postby Lars_Erik » Sat Dec 30, 2017 3:38 pm

I am rebuilding an CB650 SC 1982 and have a question about the two tubes pointing up from the between carb 1-2 and 3-4 carburetor. They are coming from the three way joint between the carbs. I have a US model with crank case breather hose so the connection on the air box is already taken. Are they drain tubes or shall trey be connected somewhere?
Attachments
InkedIMG_0913_LI_.jpg
InkedIMG_0913_LI_.jpg (4.15 MiB) Viewed 3538 times

cb650
Posts: 2959
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: Tubes from carburator

Postby cb650 » Sat Dec 30, 2017 6:31 pm

Original they did go to the airbox. They go to a T then to the airbox.
Did you clean the tank out?!?!?!?!

Lars_Erik
Posts: 4
Joined: Mon Sep 18, 2017 1:29 am

Re: Tubes from carburator

Postby Lars_Erik » Sat Dec 30, 2017 6:54 pm

Hi, tanks for prompt advise. Upon closer look i find a connection that some previous owner have intentional sealed off with a rubber cap. I presume this is the connection you
IMG_0915.jpg
IMG_0915.jpg (672.54 KiB) Viewed 3534 times
mean and that I need part 16180-460-771 and 17231-460-730 or equivalent. Does that make sense?

cb650
Posts: 2959
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: Tubes from carburator

Postby cb650 » Sat Dec 30, 2017 7:42 pm

thats the connector to the crank breather I think. The carb vents should got to the plenum box. The box right behind the carbs
Did you clean the tank out?!?!?!?!


Return to “Technical Discussion”

Who is online

Users browsing this forum: No registered users and 39 guests