Re: no space between intake rocker arm and cam lobe to fit feeler gauge
Posted: Thu Feb 08, 2018 2:37 am
That is a great GIF Folsoml, I find it strangely hypnotic.................................
Share experiences, photos, and technical knowledge
https://www.hondacb650.com/
Folsoml wrote:juntjoo wrote:cb650 wrote:as per the book 3 (and 2) is done at 2 diff rotations. In truth the Mark dont matter as long as your off the lobe.
really?? Somehow I distrust that advice, from my experience small fractions of millimeters off can be disastrous.
Take a look at this GIF of how a cam works. Notice that the cam is mostly round. Only on the lobe part does it have an affect on the tappet. The rest of the time, it is an equal distance away from the tappet. So if you check the clearance anywhere on the cam, as long as the lobe is off the tappet, the measurements should be the same.