Go Kart wiring

If it's broken or just needs tweaked

Moderators: Volker_P, tidd650

Masika
Posts: 80
Joined: Thu Apr 18, 2013 3:47 pm

Go Kart wiring

Postby Masika » Sat Feb 10, 2018 1:55 am

In 2016 a pick up turned left in front of me and totaled me and most of the bike. (79' cb650) the engine appears to be still in tact and id like to build one of those R1 go karts . So my question is, what are the bare necessity wires I need. I pretty much have the charging system down pack since ive replaced it all once before but what about the ignition and any other safety switches and relays that are in my birds nest? Can it be broke down to basically nothing? Anyone know? Thanks. also if anyone would like to purchase any other parts that may still be okay just ask and we can work something out. rear tire is a brand new pirelli demon 130/90-17

https://i.pinimg.com/originals/06/d6/74 ... 60ae63.jpg

User avatar
Folsoml
Posts: 1488
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Go Kart wiring

Postby Folsoml » Sat Feb 10, 2018 10:06 am

Sorry about your crash. I guess you came out mostly ok?

Here is a bare bones wiring diagram. It is for the DOHC Honda's of that era, but it will work on your bike as well.

genesound wrote:
This is the bare bones wiring diagram, just the minimum to make it run. Build this and add whatever else you want/need:

Image
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

MEHall
Posts: 395
Joined: Mon Nov 15, 2010 8:25 am
Location: Sweden

Re: Go Kart wiring

Postby MEHall » Sat Feb 10, 2018 5:23 pm

I can say that if you drive a CB 650 without using any electricity exept the ignition you can drive very far without the alternator working. :wink:
The only problem with not having any electricity is how to start the engine, but as an go cart engine you only need electricity at the pit stops to start the engine. Without the alternator working you still need a small battery to give ignition current. :wink:
I did see an Yamaha xt 500 once, that had a capacitor instead of a battery, but that I dont know how to install. :roll:




8)
Riding bikes? I ride where ever i want and whenever i want. :wink:

Online manual: http://cosky0.tripod.com/

Masika
Posts: 80
Joined: Thu Apr 18, 2013 3:47 pm

Re: Go Kart wiring

Postby Masika » Sun Feb 11, 2018 1:33 am

no, im pretty sure the alternator/battery powers the igniters as well.

thanks for the diagram.

I broke 7 bones, all on my left side. im fine now except for permanent metal parts in me.

User avatar
GeorgeSweety
Posts: 218
Joined: Tue Aug 08, 2017 11:47 am
Location: UK.

Re: Go Kart wiring

Postby GeorgeSweety » Sun Feb 11, 2018 3:30 am

Masika wrote:no, im pretty sure the alternator/battery powers the igniters as well.

thanks for the diagram.

I broke 7 bones, all on my left side. im fine now except for permanent metal parts in me.


Ouch! Sorry to hear that. I've got metal too, throbs like hell when the weather changes. With regards to the electrics.............er! :roll:

User avatar
Folsoml
Posts: 1488
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Go Kart wiring

Postby Folsoml » Sun Feb 11, 2018 11:06 am

GeorgeSweety wrote:
Masika wrote:no, im pretty sure the alternator/battery powers the igniters as well.

thanks for the diagram.

I broke 7 bones, all on my left side. im fine now except for permanent metal parts in me.


Ouch! Sorry to hear that. I've got metal too, throbs like hell when the weather changes. With regards to the electrics.............er! :roll:


My foot:
Image

Not from a bike crash. I'm a life long martial artist and I've broken my toes so many times they got arthritic. They put in a plate so the big knuckle of my left toe no longer bends. It feels better now than my right foot--which needs the surgery as well.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

User avatar
GeorgeSweety
Posts: 218
Joined: Tue Aug 08, 2017 11:47 am
Location: UK.

Re: Go Kart wiring

Postby GeorgeSweety » Sun Feb 11, 2018 12:40 pm

That sure is a big piece of metal for a toe bone. I got my left ankle crushed by a car pulling out of a side street, I was riding a bright red Kawasaki, with the headlights on, on a bright sunny day, and the car driver didn't see me, his actual words were "Sorry mate, I didn't see you!" :roll: I have three 3 inch screws holding the bones together and every bike that I have owned since I have had to lower the gear change lever as my foot doesn't move up as much as it should :(

User avatar
Folsoml
Posts: 1488
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Go Kart wiring

Postby Folsoml » Sun Feb 11, 2018 3:11 pm

GeorgeSweety wrote: "Sorry mate, I didn't see you!" :roll:


Isn't that what they all say/ :roll: :x :roll: :x
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

MEHall
Posts: 395
Joined: Mon Nov 15, 2010 8:25 am
Location: Sweden

Re: Go Kart wiring

Postby MEHall » Tue Feb 13, 2018 3:42 pm

Well in those boxes a car is we are practically invisible to them and at a distance the we are suerly somethig a car driver would disregard pretty easy. In many accidents here in Sweden between cars and bikes the driver says he thought it was a moped. As motorcyclists, we need to be more visible. :roll: :wink:




8)
Riding bikes? I ride where ever i want and whenever i want. :wink:

Online manual: http://cosky0.tripod.com/


Return to “Technical Discussion”

Who is online

Users browsing this forum: Baidu [Spider], Bing [Bot] and 16 guests