O ring

If it's broken or just needs tweaked

Moderators: Volker_P, tidd650

lostcause
Posts: 7
Joined: Thu Nov 16, 2017 8:44 am

O ring

Postby lostcause » Mon Apr 23, 2018 1:09 pm

Looking for a good source or the size for accelerator pump rail and fuel rail o rings. It is for PD50A carb. I ordered the kit from Sean which I thought would work but the fuel rail is too small and accelerator rail too big...

Thanks!

Sent from my LG-LS993 using Tapatalk

User avatar
Folsoml
Posts: 1629
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: O ring

Postby Folsoml » Mon Apr 23, 2018 7:15 pm

I know Sean uses Marco Rubber to buy them in bulk. If you contact them with the sizes you need, they can hook you up.

https://www.marcorubber.com/
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

lostcause
Posts: 7
Joined: Thu Nov 16, 2017 8:44 am

Re: O ring

Postby lostcause » Mon Apr 23, 2018 7:52 pm

I did take a look at that site and might have to do that but what are the sizes do I need? I went to the Honda dealership today and all they could tell me is they aren't available anymore..

Sent from my LG-LS993 using Tapatalk

User avatar
Folsoml
Posts: 1629
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: O ring

Postby Folsoml » Tue Apr 24, 2018 11:42 am

If you have a place like Fastenal where you're located, you can take one in and they'll help find the sizes you need.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,


Return to “Technical Discussion”

Who is online

Users browsing this forum: No registered users and 17 guests