1st gear only
1st gear only
Any suggestions on where to start to get my '81 into 2nd, 3rd, 4th, 5th gear? Its only giving me 1st and neutral.
Re: 1st gear only
Hmm. I've not heard of that before. I hope someone comes along with some good advice for you.
Have a problem with your CB650? Have a technical question? Click here!
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
Re: 1st gear only
under the clutch there is a spring that holds a couple linkages. It might have broke.
Did you clean the tank out?!?!?!?!
Re: 1st gear only
I''m still digging around but haven't found anything that appears broken.
Need to find an illustration of how the parts go together, how it works gear to gear..
Need to find an illustration of how the parts go together, how it works gear to gear..
Re: 1st gear only
Hello, did you solve this issue?
- GeorgeSweety
- Posts: 462
- Joined: Tue Aug 08, 2017 11:47 am
- Location: UK.
Re: 1st gear only
Steffense wrote:Hello, did you solve this issue?
Hi Steffense, one of the biggest problems that I have as a member of this site is trying to help find a solution to somebody's issue is if they never get back to you. Nobody here can know if any advice they offer has been helpful or not if there is no feedback. If a solution to a problem works then I think the best outcome would be to share that information. Unfortunately there are too many people that come here, ask a question, get their answer and you never hear from them again, so how do we know if the advice we give was correct or not?
This is just my own personal opinion and has nothing to do with the owners or management of this site.
Re: 1st gear only
Totally agree.
I will come back if i find a solution.
Right now my bike havent been on the road for a unknown number of years, its on the centerstand i cant change the gears, as i read it might be easier if the bike is rolling. Else i will try to dismandle and clean or change the clutch and slave clutch assy, and check the clutch fluid.
I will come back if i find a solution.
Right now my bike havent been on the road for a unknown number of years, its on the centerstand i cant change the gears, as i read it might be easier if the bike is rolling. Else i will try to dismandle and clean or change the clutch and slave clutch assy, and check the clutch fluid.
Re: 1st gear only
So my bike couldnt really shift into gear, i thought it could go into 1st but i was wrong.
I cleaned the clutch plates and allowed me to go to 1st, N and 2nd, when im turning the wheel a bit all the other gears work also, i guess this is not a uncommon issue.
I cleaned the clutch plates and allowed me to go to 1st, N and 2nd, when im turning the wheel a bit all the other gears work also, i guess this is not a uncommon issue.
Re: 1st gear only
I am at an impasse on the gears.
Are the transmission forks broken? blocked somehow? Can I put heat on the shaft to try and loosen something?
Any suggestions?
If it comes to opening the case, it may end up in a dusky shed or the chopping block.
Are the transmission forks broken? blocked somehow? Can I put heat on the shaft to try and loosen something?
Any suggestions?
If it comes to opening the case, it may end up in a dusky shed or the chopping block.
Return to “Technical Discussion”
Who is online
Users browsing this forum: No registered users and 69 guests