I have the gauges apart at the moment to refurbish the bodies and clean the faces and glass. Does anyone know where I can get a clamp ring to hold the flanges together when re-joining the top and bottom halves?
regards, Phil
Instrument re-assembly
Re: Instrument re-assembly
Hi Phil,
sorry, no idea where to get them. Probably too late, but here is an online instruction and they reuse the old ring:
http://www.salocal.com/sohc/tech/speedo/spedo1.htm
sorry, no idea where to get them. Probably too late, but here is an online instruction and they reuse the old ring:
http://www.salocal.com/sohc/tech/speedo/spedo1.htm
Thanks Volker, no it's not too late, although someone has done this previously on my rev-counter but without taking too much care - heress what it looks like. I'll have to spend some time re-shaping this ring, but it's good to know that it can be done. I'll experiment before refurbishing in case I scratch the bodies trying this out.
Good site on that link, I haven't found that one before.
regards, Phil
Here's the state of my rev-counter before dis-assembly...
Good site on that link, I haven't found that one before.
regards, Phil
Here's the state of my rev-counter before dis-assembly...
Return to “Technical Discussion”
Who is online
Users browsing this forum: Google [Bot] and 43 guests