Wow pretty good deductive skills, that is is my wiring.
I'll have to get the exact resistance of the pickups tonight. I believe they are 1/2 watt resistors (i'll verify). I know after the diodes i'm getting 539 ohms.
Additional info:
I hooked up the old coils and i get the same result
From G on the HEI mod. i'am only getting 9.9V, should this be 12v?
I dunno if it just the switch being weird and making a bad connection but partially depressed it shoots lots of spark until i let go or its fully depressed and makes a single spark after release
I assume you did not mean that you hooked up the pickup wires directly to the coils. That would be bad.
I'm not sure what you mean by plug orientation.
No, I'am using (BLU/YEL) after the come off the hei mod. C. One goes to one side of one coild and one to the other. Then I have 12v from the ignition for the other side of the coil.
What I meant by plug orientation was more related to firing order. But I should be able to figure that out after i get the spark firing correctly.
Also thanks, I ordered a cheap electronics enclosure off amazon and decided to put a switch in as an anti-theft deterrent (was thinking about a keyless ign. or maybe using a proximity key or something) for now its a key switch.