Help! I am busy rebuilding my 650z UK spec bought from E Bay I have now completed the head gasket job and set about the wiring problems. I cannot get the Indicators to work and the relay is missing. I have 3 wires a White/green a Grey and a Green all going to where the relay should be. Am I right is the relay unit a 3 pin unit does anyone have a part number or information regarding the wiring of the indicators (direction/turn lamps)
I only have a Haynes manual and it is not the best to work from
Thanks
Indicator (TurnSignal ) Relay
Indicators
Hi sorry forgot to log in so it shows as guest.....all help will be appreciated I think I am right in Saying that the Winker Realay is only a two pin unit and the Green Wire I refer to is not used (spare ground cable)
Can someone confirm this for me
Thank you
Keith
Can someone confirm this for me
Thank you
Keith
Stay Safe Stay Upright
The original part nr. for the winker relay (CB650Z, country code: E=ENGLAND) is 38301-415-004
From the wiring diagram, the winker relay of the E version is indeed only a "two pin" unit, and only the grey cable and the white&green cable need to be connected.
So you're right and every conventional 2-pole winker relay should work for you.
Same for all other country versions, at least in Europe, except for Germany where the winker relay is a "three pin" unit, and all three cables need to be connected (green; white&green, grey)
From the wiring diagram, the winker relay of the E version is indeed only a "two pin" unit, and only the grey cable and the white&green cable need to be connected.
So you're right and every conventional 2-pole winker relay should work for you.
Same for all other country versions, at least in Europe, except for Germany where the winker relay is a "three pin" unit, and all three cables need to be connected (green; white&green, grey)
Robert is right. My Z model have got a two pin relay.
Here is the wiring diagram for the Z model:
http://cosky1.tripod.com/imagelib/siteb ... et=tlx_new
Here is the wiring diagram for the Z model:
http://cosky1.tripod.com/imagelib/siteb ... et=tlx_new
Thank you
Thanks guys, great help I felt as though I just needed the re-assurance, when I got the bike the previous owner had a 3 pin relay fitted using the green wire.... alas the winkers never worked. I attempted to rectify this using a new 3 pin, only to blow fuses as though tomorrow was never coming.
I will get a 2 pin one now and go at it again. Many thanks for wiring diagram. Nice to know help is there when needed.
Keith
I will get a 2 pin one now and go at it again. Many thanks for wiring diagram. Nice to know help is there when needed.
Keith
Stay Safe Stay Upright
Return to “Technical Discussion”
Who is online
Users browsing this forum: No registered users and 33 guests