Parting Out: Honda CB650
Posted: Sun Jul 27, 2014 10:31 am
SOHC CB650 & CB650C PARTS
Don't let the fancy-schmancy layout of this thread fool you. Not a business, not incorporated, not an LLC. I'm a former Techno-Geek, now unemployed. I've sold a lot of parts to you guys, I've met a few of you in person, and I sincerely appreciate it when you come to me looking for the parts you need.
79 Honda CB650 - 80 Honda CB650 - 80 Honda CB650C Custom
81 Honda CB650 - 81 Honda CB650C Custom - 82 Honda CB650
I've been parting out several CB650 models both here and on SOHC4 over the past few years. I have SEVERAL different threads here on HondaCB650.com where I am parting out individual bikes, but many of those threads have become stagnant or 'stalled'. I am STILL parting them out however. With so many threads for each of those individual bikes, I thought perhaps it would be better to start THIS thread, as a general 'CB650 Parts', to let everyone know that I pretty much always have a CB650 parts bike that I'm breaking down (and always looking for more), and I'm always selling CB650 parts.
I currently do NOT have any of these parts available (will update this thread when I do):
- Camshaft
- Fuel Tank
- Carbs
- Side covers
Some might think that I am a business, but I'm not. I'm a stay-at-home dad of three, an average Joe, and a motorcycle junkie. I own and ride several different bikes. I have a small workshop in the basement of my home. I often buy local UJM's from the late 70's and early 80's. I did not intentionally try to 'specialize' in the CB650, but they tend to follow me home more often than any others. I part them out to supplement my wife's income and try to help make ends meet, and sometimes I fix them.
I used to keep track of all the parts that have sold or were not available, for each individual bike. I still do, or at least TRY, but with a dozen different parts bikes, it is becoming increasingly difficult. If there is something in particular that you're looking for, let me know and I will dig through my parts bins and see if I have it. I will answer PM's and posts made here in this thread, but if you have an interest or questions about specific parts, it's usually best (and quicker) if you email me directly at witttom@yahoo.com (three T's in w-i-t-t-t-o-m).
I'm willing to take checks, money orders, chickens, goats, magic beans, flux capacitors, other motorcycle stuff, etc. ...or if you're local (I'm in Southwest Ohio, Northwest of Cincinnati) and want to save on shipping costs, you're welcome to pay in cash and pickup. I have taken PayPal for 90% of the parts that I have sold over the past couple years (been a PP member for 15+ years) but trying to step away from that if I can. If you're in a hurry or that is your only option, I'm certainly still willing to accept those payments though. I usually make a couple trips to the Post Office each week, and I'm usually pretty quick about getting parts shipped out. It does occasionally take me a couple days to pull items that are a bit more involved. I'm also willing to ship outside the US and have done so many times, but it can get fairly expensive on large/heavy parts.
Don't let the fancy-schmancy layout of this thread fool you. Not a business, not incorporated, not an LLC. I'm a former Techno-Geek, now unemployed. I've sold a lot of parts to you guys, I've met a few of you in person, and I sincerely appreciate it when you come to me looking for the parts you need.
79 Honda CB650 - 80 Honda CB650 - 80 Honda CB650C Custom
81 Honda CB650 - 81 Honda CB650C Custom - 82 Honda CB650
I've been parting out several CB650 models both here and on SOHC4 over the past few years. I have SEVERAL different threads here on HondaCB650.com where I am parting out individual bikes, but many of those threads have become stagnant or 'stalled'. I am STILL parting them out however. With so many threads for each of those individual bikes, I thought perhaps it would be better to start THIS thread, as a general 'CB650 Parts', to let everyone know that I pretty much always have a CB650 parts bike that I'm breaking down (and always looking for more), and I'm always selling CB650 parts.
I currently do NOT have any of these parts available (will update this thread when I do):
- Camshaft
- Fuel Tank
- Carbs
- Side covers
Some might think that I am a business, but I'm not. I'm a stay-at-home dad of three, an average Joe, and a motorcycle junkie. I own and ride several different bikes. I have a small workshop in the basement of my home. I often buy local UJM's from the late 70's and early 80's. I did not intentionally try to 'specialize' in the CB650, but they tend to follow me home more often than any others. I part them out to supplement my wife's income and try to help make ends meet, and sometimes I fix them.
I used to keep track of all the parts that have sold or were not available, for each individual bike. I still do, or at least TRY, but with a dozen different parts bikes, it is becoming increasingly difficult. If there is something in particular that you're looking for, let me know and I will dig through my parts bins and see if I have it. I will answer PM's and posts made here in this thread, but if you have an interest or questions about specific parts, it's usually best (and quicker) if you email me directly at witttom@yahoo.com (three T's in w-i-t-t-t-o-m).
I'm willing to take checks, money orders, chickens, goats, magic beans, flux capacitors, other motorcycle stuff, etc. ...or if you're local (I'm in Southwest Ohio, Northwest of Cincinnati) and want to save on shipping costs, you're welcome to pay in cash and pickup. I have taken PayPal for 90% of the parts that I have sold over the past couple years (been a PP member for 15+ years) but trying to step away from that if I can. If you're in a hurry or that is your only option, I'm certainly still willing to accept those payments though. I usually make a couple trips to the Post Office each week, and I'm usually pretty quick about getting parts shipped out. It does occasionally take me a couple days to pull items that are a bit more involved. I'm also willing to ship outside the US and have done so many times, but it can get fairly expensive on large/heavy parts.
