Page 4 of 7

Re: Parting Out: Honda CB650

Posted: Wed Apr 27, 2016 10:21 am
by Zenbott33
I'm looking into wiring harness and I don't have electric start or the original high beems and turn signal switch.
I have some for the beems and turn signals now a generic but can I start and work on the bike with out that electric starter switch?
Also do you have harness that are in good condition or a whole set up from the start switch back to the battery I'll rewire it all if I have to haha
Thanks a lot

Re: Parting Out: Honda CB650

Posted: Wed Apr 27, 2016 10:41 am
by witttom
Zenbott33 wrote:I'm looking into wiring harness and I don't have electric start or the original high beems and turn signal switch.
I have some for the beems and turn signals now a generic but can I start and work on the bike with out that electric starter switch?
Also do you have harness that are in good condition or a whole set up from the start switch back to the battery I'll rewire it all if I have to haha
Thanks a lot


Email sent/replied. ;)

Re: Parting Out: Honda CB650

Posted: Sun May 01, 2016 8:38 am
by TheBrosh
Hi Tom,

Where are you located? I'm looking for a whole motor, carbs and everything. Got any sitting around?

Re: Parting Out: Honda CB650

Posted: Sun May 01, 2016 9:23 pm
by witttom
TheBrosh wrote:Hi Tom,

Where are you located? I'm looking for a whole motor, carbs and everything. Got any sitting around?


Southwest Ohio, Northwest of Cincinnati.

I have two or three whole engines, minus cams, and I don't have any carbs unfortunately.

Re: Parting Out: Honda CB650

Posted: Fri May 13, 2016 12:34 pm
by witttom
Acquired another CB650 recently (it's been a while) that I will be parting out....

81 CB650C (Custom). It's a bit crusty with surface corrosion, rust inside the tank, and I haven't opened up yet to see what the cam look like, but click on images to have a closer look. I've had several people asking about carbs. This is the first set I've had in a while. I hope to start breaking this one down over the next few days.

Image

Image

Re: Parting Out: Honda CB650

Posted: Tue Jun 28, 2016 2:20 pm
by witttom
I've sold a dozen cams over the past few years, but haven't had one available since sometime last year. After I picked up this most recent CB650 parts bike, I've had a half a dozen different guys inquire about the cam, but just haven't had a chance to tear into it. I got it on my lift today though and began breaking it down. The cam is very nice, still wet with oil. Minimal wear. 19k-miles. Probably one of the nicest that I've had available. Because I don't know who is in queue, nor do I know the order, I've simply just gotta post it up to whoever is interested. I have additional photos showing close-ups of the lobes for anyone who wants to see.

Image

$120 plus shipping. Includes the speedo drive gear.
I prefer SquareCash, but can accept PayPal, money order, or check as well.

Re: Parting Out: Honda CB650

Posted: Thu Jun 30, 2016 2:58 pm
by witttom
I am departing July-6 for some extended travels that will take me outside the US and often times outside of Internet access. If you're looking to acquire any parts from me prior to that, my last day to ship will be July-5 (and even then, it might be sketchy for me to get something shipped out that day). Otherwise, hit me up when I return. I should be back in the States sometime in the last week of July. It will be very difficult for me to answer any emails prior to that time.

Re: Parting Out: Honda CB650

Posted: Wed Jul 20, 2016 5:13 pm
by MiGhost
I'll drop this here for your return. Hope the trip was a good one.
If that cam is still available. I'll take it!
Also looking for a front spoked wheel hub. No rim or spokes.
Tank, and side covers on the 81. Condition, and Price?
Exhaust on the 81. Condition, and Price?

Re: Parting Out: Honda CB650

Posted: Sun Jul 24, 2016 9:39 am
by witttom
MiGhost wrote:I'll drop this here for your return. Hope the trip was a good one.
If that cam is still available. I'll take it!
Also looking for a front spoked wheel hub. No rim or spokes.
Tank, and side covers on the 81. Condition, and Price?
Exhaust on the 81. Condition, and Price?


Back from my travels. Still in recovery mode and TRYING to catch up with everything. Apologies for the delay. ;)

Cam... check.

Unfortunately, I don't have any spoked wheels or hubs at the moment. At least I don't think I do. I'll double-check to be sure though.

I sold the tank from my blue 81 C-model last month. I do still have the side covers. They're in good shape, but I do remember noting a crack in one of them that was not really noticeable. I'll get some photos.

I need to have a closer look at the exhaust, which I will try to get to either this afternoon or tomorrow.

Send me an email directly at witttom@yahoo.com (three T's in w-i-t-t-t-o-m) with your zipcode and we'll try to figure it out all. That's the quickest way to get my attention. I'm a bit buried right now and still jet-lagged, so I'll apologize in advance for me dragging my butt. Hehe...

Re: Parting Out: Honda CB650

Posted: Fri Jul 29, 2016 4:15 pm
by MiGhost
Unfortunately I am going to have to hold off on that cam, and other bits.

Re: Parting Out: Honda CB650

Posted: Fri Jul 29, 2016 11:10 pm
by cb650
you have a speedo cable from a 81 custom or 82 nitehawk? Has to one of them. the others are shorter.

Re: Parting Out: Honda CB650

Posted: Sat Jul 30, 2016 12:15 pm
by witttom
cb650 wrote:you have a speedo cable from a 81 custom or 82 nitehawk? Has to one of them. the others are shorter.


Yes, I do have a speedo cable from my 81 CB650C that I have yet to remove. That bike is on my lift waiting for me to break it down, but I've not had the chance to get to it yet. I've been swamped with family obligations ever since I set foot back on American soil this past week. Hoping I can get back into the swing of things here within a couple days.

Re: Parting Out: Honda CB650

Posted: Sat Jul 30, 2016 4:07 pm
by cb650
ok PM me how much.

Re: Parting Out: Honda CB650

Posted: Sun Aug 07, 2016 6:08 am
by Shoestring-uk
Hi Tom do you have these two items for a 1979 CB650 (RCO3) and do you ship to the UK.
part no 35610-426-003 switch comp neutral.
part no 35753-323-000 rotor neutral switch.

Regards Dave

Re: Parting Out: Honda CB650

Posted: Tue Aug 09, 2016 9:12 am
by witttom
cb650 wrote:ok PM me how much.


Shoestring-uk wrote:Hi Tom do you have these two items for a 1979 CB650 (RCO3) and do you ship to the UK.
part no 35610-426-003 switch comp neutral.
part no 35753-323-000 rotor neutral switch.

Regards Dave


I seem to be struggling with PM's here. Sent out several PMs to various individuals over the past couple days. I saw them sitting in my Outbox. Now they're not there, but nor do I see them in my sent folder. One person responded to one that had been sitting in my outbox for a couple weeks, but the others now appear to be gone.