Page 1 of 2

Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Wed Sep 04, 2013 10:23 am
by witttom
1980 Honda CB650
This is a project bike I bought last week. The owner put a lot of work into building it how he wanted it. Even had 'Murdercycle' cut out in the front fender (I didn't get the front fender). Not really my thing, but kinda cool. Unfortunately for the seller, when he went to get the title transferred into his name, he discovered that the VIN on the bike did not match the title. So he was stuck. He parked the bike in his garage. That's where it has sat since last year. It was running at one time. I have not tried to start it. 14,272 miles showing on the odometer.

FAQ:
- The cam has sold.
- Frame has had some minor alterations. I do not have a title.
- Yes, this bike has two headlights.
- I do not have the original seat.
- I DO have the 16" rear wheel that matches the front.
- It currently has a 17" wire-spoke wheel mounted on the rear.
- Appears to have the exhaust from a 650 'Custom'.
- I do not have the stock airbox.
- Pegs appear to be aftermarket.

Image
Image

This will make the tenth CB650 that I have parted out in the past couple years. Some might think that I am a business, but I'm not. I'm a stay-at-home dad of three, an average Joe, and a motorcycle junkie. I own and ride several different bikes. I have a small workshop in the basement of my home. I often buy local UJM's from the late 70's and early 80's. I did not intentionally try to 'specialize' in the CB650, but they tend to follow me home more often than any others. I part them out to supplement my wife's income and try to help make ends meet, and sometimes I fix them for myself.

I will answer PM's, but if you have an interest or questions about specific parts, it's usually best (and quicker) if you email me directly at witttom@yahoo.com (three T's in w-i-t-t-t-o-m).

I will be updating this thread with a list of parts that have sold. It is fairly common for me to ship parts out the following day after receiving a PayPal payment, but sometimes it takes me two or three. If PayPal doesn't work for you, we can figure out an alternative. If you do not see the part that you need, check with me. I still have LOTS of parts from my other CB650's and may have what you're looking for.

These items have sold (or are not available) from this bike:
Original seat
Side covers
Stock airbox
Charging Rotor
Black Comstar Wheel Set (Front/Rear)
Front Forks
One (of two) headlight bucket (still have the other)
Aftermarket Fork Ears
Seat
Rear Fender
Tail Light
Rear Signals
Sidecovers
Front Brake Rotor
Cam
Carbs

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Sun Sep 08, 2013 8:41 am
by witttom
Charging Rotor has sold.

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Sun Sep 08, 2013 2:59 pm
by witttom
***Images Removed***

Can has sold.

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Sun Sep 22, 2013 3:17 pm
by witttom
These parts have recently sold....

Black Comstar Wheel Set (Front/Rear)
Front Forks
One (of two) headlight bucket (still have the other)
Aftermarket Fork Ears
Seat
Rear Fender
Tail Light
Rear Signals
Sidecovers
Front Brake Rotor

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Wed Oct 23, 2013 2:45 pm
by witttom
I forgot to mark that the cam has sold from this bike. Sorry about that.

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Sat Feb 15, 2014 7:35 pm
by onepieceatatime
Do you still have the carbs? If so, how much, and what condition are they in?
Thanks.

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Sat Feb 15, 2014 10:26 pm
by witttom
onepieceatatime wrote:Do you still have the carbs? If so, how much, and what condition are they in?
Thanks.


Unfortunately, no. Sorry.

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Mon Feb 24, 2014 12:50 am
by MrDavalli3
Do you still have the Rear wire wheel? Looking to pick one up. I can't find one reasonably priced online. Still searching locally. What's your lowest you'd go shipped? Assuming you still have it that is :)

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Mon Feb 24, 2014 7:56 am
by witttom
MrDavalli3 wrote:Do you still have the Rear wire wheel? Looking to pick one up. I can't find one reasonably priced online. Still searching locally. What's your lowest you'd go shipped? Assuming you still have it that is :)

I do have one left. The 17" rear wire-spokes are significantly more desirable than any others, and I tend to sell them for quite a bit more than the others. If you're still interested though, email me at witttom@yahoo.com (three T's in w-i-t-t-t-o-m) with your zipcode, and we'll figure out what it'll take. ;)

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Thu Mar 06, 2014 12:58 pm
by flamdchicken
Wondering you you have any other carb parts or another front rotor laying around. Also do you have a turn signal relay?

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Thu Mar 06, 2014 7:30 pm
by witttom
flamdchicken wrote:Wondering you you have any other carb parts or another front rotor laying around. Also do you have a turn signal relay?


Front rotor(s) and turn signal relays I have. Carbs parts, I do not.

Email me with your zipcode and we'll figure something out. :)

witttom@yahoo.com
(three T's in w-i-t-t-t-o-m)

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Mon Apr 07, 2014 1:41 pm
by witttom
Removed

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Tue May 13, 2014 1:43 pm
by witttom
Still parting this bike out, as well as other CB650's.

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Sat May 17, 2014 10:44 pm
by victorspecial
How much for the barrels? Thanks

Re: Parting Out: 1980 Honda CB650 [Murdercycle #10]

Posted: Sun May 18, 2014 1:08 am
by Folsoml
victorspecial wrote:How much for the barrels? Thanks


You may get a quicker response if you email him:

witttom@yahoo.com