Hello from upstate NY

Any conversation that doesn't fit the forums above

Moderators: Volker_P, tidd650

rb550fours
Posts: 12
Joined: Tue Dec 17, 2013 6:15 pm

Hello from upstate NY

Postby rb550fours » Fri Dec 20, 2013 5:14 pm

Hi guys,
I just joined your forum. I have a couple of 650's , love them, but they are like the black sheep of the Honda SOHC4 family, hard to get accurate information on, unless you know others that eat this stuff regularly . I could use some learnin on these fine machines and I'm hoping that I can get a little direction ,should I get in a jam, and that's why I'm here....and to get ideas about upgrades....and maybe at some time ,I might have enough 650 experience to guide others new guys after a while.
Been around 500-4 and 550-4's for a few years, I kinda collect them I guess. Rebuilt all the ones I have from ground up. My little collection got wiped out in Irene, so while I was rebuilding and expanding the 550 collection, I needed a ride and a 81 650c came up, reluctantly I snagged it.and Holy cow , I love that machine, It's my first choice to ride every time I get in garage to choose the ride of the day.
I liked the upgrades that followed the end of the 550's so much that I picked up no papers complete 650c and transferred the entire machine to a 500 frame with 550 tank....I like the "classic" look.
A few weeks ago, I was again fortunate enough to purchase an 81 650, it's a little different than the custom but I really like it. It has some electrical issues that I'm trying to work out next, but the rest of it is reasonably respectable now. This one was only on the road for one season before it had some trouble and was cast aside...only 1700 miles on it. Hoping to have it to original glory this summer.
The 650 c has 44k + on it now, runs great , I think it needs a visual freshen up that I hope to start this winter.
Well that's me. So hello .

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Hello from upstate NY

Postby Folsoml » Fri Dec 20, 2013 6:11 pm

Welcome here! It looks like you are certainly qualified to work on the Cb650. If you look in my signature, you will find a link to many of the most common issues that might arise with this bike.

Good luck, and we love pictures--even of non-CB650's!
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

rb550fours
Posts: 12
Joined: Tue Dec 17, 2013 6:15 pm

Re: Hello from upstate NY

Postby rb550fours » Fri Dec 20, 2013 6:54 pm

Image
This is the 650 on a 500 frame with 550 tank
Image
most of the herd
Image
last 550 project. done now
Image
last 500 project
Image
the 550 project before that
Image
550 project before that

rb550fours
Posts: 12
Joined: Tue Dec 17, 2013 6:15 pm

Re: Hello from upstate NY

Postby rb550fours » Fri Dec 20, 2013 7:01 pm

Like pictures,but I don't always take them when the bikes are finished.
Image
and then
Image

Got some more if interested.This could go on for a while.

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Hello from upstate NY

Postby Folsoml » Fri Dec 20, 2013 7:25 pm

You need a hobby! :lol:
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

rb550fours
Posts: 12
Joined: Tue Dec 17, 2013 6:15 pm

Re: Hello from upstate NY

Postby rb550fours » Sat Dec 21, 2013 12:38 am

Isn't this a hobby?
Image
or this
Image

Image

Image
It's always hard to find a decent seat
Image

Image

Image

Image

Image

rb550fours
Posts: 12
Joined: Tue Dec 17, 2013 6:15 pm

Re: Hello from upstate NY

Postby rb550fours » Sat Dec 21, 2013 12:45 am

sorry about the black one , not a good pic.
Image
This one is for winter riding
Image
and I'm sure there is more but that's as much as I can stand in one session.
So that is me and some of the herd.

MiGhost
Posts: 379
Joined: Tue Jun 07, 2011 2:30 am
Location: South Central Mitten

Re: Hello from upstate NY

Postby MiGhost » Sat Dec 21, 2013 3:05 am

Welcome over to the 650 side of the SOHC4 world.

Nice collection of rides you have there. Your experience with the 500/550's will generally carry over to the 650. Just think of the 650 as the high performance version of the 550. As far as part interchange info. You will find that the 650 is a blend of SOHC, and DOHC parts

Electrical issues usually center around the charging system with the rotor, and harness connector being the normal causes of problems. These usually lead to burnt out voltage regualtor, and CDI ignition units. Other electrical problems that I have dealt with include ignition switch bottom cover (No power when switch turned on), and bad solenoid to starter cable (Hot start problems).
~ Ghost

PD50 Carb Info
82 CB650SC Brake Caliper Info

Stable
Wayward Son:1980 CB650C, RestoMod Period Custom Touring
Bad Moon: 1983 XJ750MK Midnight Maxim, Full Dress Tour Deluxe w/ X-1 Fairing
Nemesis: 1983 XJ750K Maxim, Old School style chopper

rb550fours
Posts: 12
Joined: Tue Dec 17, 2013 6:15 pm

Re: Hello from upstate NY

Postby rb550fours » Sat Dec 21, 2013 10:01 am

MiGhost,
The newest 81 650 that I have seems to have all those issues. CDI's both fried, Reg/Rec looks like it might have seen some heat too ,I expected the problem's source to be the rotor ,I opened it up for a visual , found nothing unusual , didn't smell burned.
Folsoml,
Thanks I'm going to have to find a thread on the charging system and a multimeter so I can replace parts at the source of the trouble so I don't fry the new parts that are coming. I did a fly by on this site a day or two ago and found it or similar, hoping to find it during holiday time off .
Have 82 wiring harness coming in soon , a place to start, I don't trust the original harness, it's had hot spots and is a little crunchier that I'd like.
I was going with Ricks for the replacement electric parts, is that the way to go?

Pbiggs
Posts: 146
Joined: Fri Aug 09, 2013 6:44 pm
Location: Salt Lake

Re: Hello from upstate NY

Postby Pbiggs » Sat Dec 21, 2013 11:52 am

LOOKING GOOD, more pics of your 650s please!

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Hello from upstate NY

Postby Folsoml » Sat Dec 21, 2013 12:37 pm

rb550fours wrote:MiGhost,
The newest 81 650 that I have seems to have all those issues. CDI's both fried, Reg/Rec looks like it might have seen some heat too ,I expected the problem's source to be the rotor ,I opened it up for a visual , found nothing unusual , didn't smell burned.
Folsoml,
Thanks I'm going to have to find a thread on the charging system and a multimeter so I can replace parts at the source of the trouble so I don't fry the new parts that are coming. I did a fly by on this site a day or two ago and found it or similar, hoping to find it during holiday time off .
Have 82 wiring harness coming in soon , a place to start, I don't trust the original harness, it's had hot spots and is a little crunchier that I'd like.
I was going with Ricks for the replacement electric parts, is that the way to go?


Some helpful advice from Volker_P:
Volker_P wrote:Rotor interchangeability:
CB 650 F+C (RC03+RC05+RC08)
CB 750 KZ (RC01); CB 750 F (RC04); CB 750 C (RC06)
CB 900 F (SC01+SC09) Bol d'Or
CB 1100 F (SC11) Super Bol d'Or.
(according to http://www.cb-4zylinder.de/cgi-bin/shop ... 06.03.html)

Stator interchangeability:
CB 650 (RC03+RC05+RC08)
CB 750 KZ (RC01); CB 750 F (RC04); CB 750 C (RC06)
CB 900 F (SC01+SC09) Bol d'Or
according to http://www.my-bikeshop.de/product_info. ... ATOR.html/

Rotor resistance should be 4-10 Ohms between sliprings, no contact to ground/rotor chassis.
Stator resistance should be 0.4-0.5 Ohms, symmetrical between each pair of yellow wires, no contact to ground/stator mounts.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

MiGhost
Posts: 379
Joined: Tue Jun 07, 2011 2:30 am
Location: South Central Mitten

Re: Hello from upstate NY

Postby MiGhost » Sat Dec 21, 2013 9:37 pm

A little better interchange info

31110-425-005 ROTOR
31110-426-832 ROTOR
79 - 81 CB650/CB650C/CB650SC
79 - 82 CB750F/K
80 - 82 CB750C
82 - 83 CB750SC
81 - 82 CB900F
80 - 82 CB900C
79 CB750L
1983 CB1000C

31120-426-005 STATOR
79 - 81 CB650/CB650C/CB650SC
Note: Includes wiring for neutural, and oil pressure lights in harness

31120-425-852 STATOR
79 - 82 CB750F/K
80 - 82 CB750C
82 - 83 CB750SC
81 - 82 CB900F
79 CB750L
Note: Does not include wiring for neutural, and oil pressure lights in harness.

31120-461-671 STATOR
31120-461-405 STATOR
80 - 82 CB900C
83 CB1000C
83 CB1100F
Note: Does not include wiring for neutural, and oil pressure lights in harness.

Part sources
Rick's Motorsport Electrics New rotors, stators, regultaors, and CDIs
Tim Parrott Rebuilt rotors, and stators
Oregon Motorcycle Parts New regulators, and wiring harness supplies
Electrosport New rotors, stators, regultaors, and CDIs
~ Ghost

PD50 Carb Info
82 CB650SC Brake Caliper Info

Stable
Wayward Son:1980 CB650C, RestoMod Period Custom Touring
Bad Moon: 1983 XJ750MK Midnight Maxim, Full Dress Tour Deluxe w/ X-1 Fairing
Nemesis: 1983 XJ750K Maxim, Old School style chopper

usbear
Posts: 361
Joined: Sun Mar 10, 2013 9:55 pm

Re: Hello from upstate NY

Postby usbear » Sat Dec 21, 2013 10:53 pm

Welcome to the forum sir. Nice rides!

cb650
Posts: 2959
Joined: Fri Mar 03, 2006 7:20 am
Location: Denver CO USA
Contact:

Re: Hello from upstate NY

Postby cb650 » Sat Dec 21, 2013 10:59 pm

Very nice collection. I showed the G/F dont think she will bitch about mine now. lol
Did you join sohc4 also?
Did you clean the tank out?!?!?!?!

rb550fours
Posts: 12
Joined: Tue Dec 17, 2013 6:15 pm

Re: Hello from upstate NY

Postby rb550fours » Sun Dec 22, 2013 12:02 pm

CB 650, Yes , I've been on SOHC4 since April 2011. Excellent people, endless knowledge, especially on 550 and 750.
The 650 owners are also excellent about their own machines There are many there from down under who have a little different machines than we do here in the states, I'm sure most of the info applies, but some doesn't and like I said the 650 really is the blacksheep in the SOHC4 family. So not as much ready information on these fine gems there, I need to be where the main focus is about the machines that I like and am currently working on. I can already see that there is a world of knowledge here concentrated on the very thing I'd like to focus on, and just by running through the threads, that this group is friendly, willing to share info, and are proud to be owners of this not so well known machines.
Oh I've found ( second handedly) that a G/F's bitching about bikes is nothing like the thunderstorms that a wife can deliver regularly. Mine was only a little spippy about the first 5, rolled her eyes after 10, and has excepted it for " what it is " after that. Whatever it is. I'm happy about that so far, but I have heard the "Aren't you going to sell one?" a couple times.
I do have 2 last pictures this time they are 650's
Image
This is my regular ride,as you can tell by the fact that it could use a visual freshening up
Image
This is my most recent purchase with electric issues, I gave it a general get the rust off clean up, it has a wopping 1700 miles on the clock and I'm still waiting for an outastate title to show up.
Thanks for the electric threads Volker-P, Mi Ghost and Folsoml, I got some reading to do this week.


Return to “Everything else”

Who is online

Users browsing this forum: No registered users and 1 guest