Wanted intact starter/kill switch assembly for 83 CB650SC
-
- Posts: 27
- Joined: Fri Aug 23, 2013 4:21 pm
Wanted intact starter/kill switch assembly for 83 CB650SC
Looking for a starter/kill switch assembly for my 83 Nighthawk. Apparently the wiring is unique to this model year? Anyone who has one please let me know! Thanks!!!
Re: Wanted intact starter/kill switch assembly for 83 CB650S
I have three complete wiring harnesses and two or three kill switch and at least one throttle and kill switch. Pm me with email and I will send my email address. Where are you located?
Re: Wanted intact starter/kill switch assembly for 83 CB650S
If those dont work I have on off a 84. 83 should be a DOHC.
Did you clean the tank out?!?!?!?!
Re: Wanted intact starter/kill switch assembly for 83 CB650S
cb650 :
If yours are known to be correct then go with those.
Premiumroast :
Check with Cb650 as he has correct one. While we are at it I would like pics to ID mine. (pics of 83)
I have a 84 and 85 650sc bikes and bunch of spares for them as well as 83 spares.
I have a Prepped crank: Lightened by 5lbs, turned, trued, balanced and balanced rods set for it. Rods have bearings for that crank. Sell for 350 w/rods if u know any one.
Thanks
Bob
If yours are known to be correct then go with those.
Premiumroast :
Check with Cb650 as he has correct one. While we are at it I would like pics to ID mine. (pics of 83)
I have a 84 and 85 650sc bikes and bunch of spares for them as well as 83 spares.
I have a Prepped crank: Lightened by 5lbs, turned, trued, balanced and balanced rods set for it. Rods have bearings for that crank. Sell for 350 w/rods if u know any one.
Thanks
Bob
-
- Posts: 27
- Joined: Fri Aug 23, 2013 4:21 pm
Re: Wanted intact starter/kill switch assembly for 83 CB650S
cb650: I'm located in Manitoba Canada and if you have an intact throttle/kill switch assembly i'd be interested. I am currently starting the bike by contacting the starter wires, far from a perfect method! Bike is also only running on two outside cylinders but I suspect it is a carb issue as the choked rod is bent, and the two inside cylinders are being fed pure gasoline.
-
- Posts: 27
- Joined: Fri Aug 23, 2013 4:21 pm
Re: Wanted intact starter/kill switch assembly for 83 CB650S
usbear: thanks for the info! I was given the bike when I sold my 09 BMW G650, and have been living by the adage "having an older bike makes you a better mechanic" haha
Re: Wanted intact starter/kill switch assembly for 83 CB650S
I like it!
Good Luck!
Keep posted.
Good Luck!
Keep posted.
Re: Wanted intact starter/kill switch assembly for 83 CB650S
premiumroast wrote:cb650: I'm located in Manitoba Canada and if you have an intact throttle/kill switch assembly i'd be interested. I am currently starting the bike by contacting the starter wires, far from a perfect method! Bike is also only running on two outside cylinders but I suspect it is a carb issue as the choked rod is bent, and the two inside cylinders are being fed pure gasoline.
I'll double check it and get back to you. send me a pm or email cb650@juno.com
Did you clean the tank out?!?!?!?!
-
- Posts: 27
- Joined: Fri Aug 23, 2013 4:21 pm
Re: Wanted intact starter/kill switch assembly for 83 CB650S
cb650: Thanks, appreciate it! Got the carbs cleaned and tuned for $40. Picking them up on Tuesday!
-
- Posts: 27
- Joined: Fri Aug 23, 2013 4:21 pm
Re: Wanted intact starter/kill switch assembly for 83 CB650S
Do you have any idea if the starter/kill switch off an 84 Honda Nighthawk would work on my bike??
Re: Wanted intact starter/kill switch assembly for 83 CB650S
Well first of all it is the connector that matters and you can change that.So when cb650 gets back to you should be not much problem.
Take a close up pic of the electrical plug in. (Connectors)
Take a close up pic of the electrical plug in. (Connectors)
-
- Posts: 27
- Joined: Fri Aug 23, 2013 4:21 pm
Re: Wanted intact starter/kill switch assembly for 83 CB650S
usbear actually the bike mechanic who cleaned and tuned the carbs has a fully intact starter and kill switch assembly off an 84 Nighthawk 750 for like $35 Canadian so I might buy it from him, just want to make sure it is going to fit up properly.
-
- Posts: 27
- Joined: Fri Aug 23, 2013 4:21 pm
Re: Wanted intact starter/kill switch assembly for 83 CB650S
carbs on, but outside right cylinder and inside left cylinder not running. Discovered the inside left cylinder plug wire was broken inside. I think I might have plugs/coils mixed up.
Re: Wanted intact starter/kill switch assembly for 83 CB650S
Left Coil = 1 and 4 Outside
Right Coil = 2 and 3 Inside
Right Coil = 2 and 3 Inside
Return to “Accessories and Apparel”
Who is online
Users browsing this forum: No registered users and 18 guests