After a short break while waiting for parts, I hit a snag in rebuilding my carbs. The vent pipe and and rubber hose on the fuel joint between carbs 2 & 3 are dry rotted. Can anyone point me in the right direction for an alternative. With 35+ year old bikes I would think this is a common problem.
Carb vent pipe and fuel joints
Carb vent pipe and fuel joints
1982 CB650SC
Re: Carb vent pipe and fuel joints
I go to a local auto parts store and get the appropriate size fuel line. They sell it in bulk. Even Lowes and Home Depot usually have it.
One of the things you have circled is the brass pipe that the fuel line from the gas tank connects to. Is this what you meant to circle? It's not rubber.
One of the things you have circled is the brass pipe that the fuel line from the gas tank connects to. Is this what you meant to circle? It's not rubber.
Have a problem with your CB650? Have a technical question? Click here!
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
Re: Carb vent pipe and fuel joints
I was hoping that was the case, but wanted to confirm with the more knowledgeable folks on the forum. I wasn't clear on my original post, I mean the rubber tub that attached to the long end of the brass fitting.
1982 CB650SC
Re: Carb vent pipe and fuel joints
Yep. Definitely run of the mill fuel line.
Have a problem with your CB650? Have a technical question? Click here!
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
Return to “Technical Discussion”
Who is online
Users browsing this forum: No registered users and 38 guests