Hi.
Im about to change engine gaskets on a Honda CB650 1980.
I want to change the bolts as well and clean it up. Tried David Silver but I did not fint a bolt sett. I have a full gasket sett.
Anyone with som ideas?
David
Where can I get my bolts?
-
- Posts: 13
- Joined: Thu Sep 28, 2017 3:34 am
Re: Where can I get my bolts?
Bolts from topp down to the head gasket. Where the cylinder starts. Isn't it smart to change the bolts when you first take it apart? Do not know the name of this. My first build.
David
David
-
- Posts: 13
- Joined: Thu Sep 28, 2017 3:34 am
Re: Where can I get my bolts?
aaaaah. So its just the head bolts going right thru ok
-
- Posts: 13
- Joined: Thu Sep 28, 2017 3:34 am
Re: Where can I get my bolts?
dont need anything else? Gaskets new head bolt and som mounting paste?
Re: Where can I get my bolts?
What kind of "paste" are you planning to use? Make sure you do not use RTV or any kind of silicone gasket-maker.
Have a problem with your CB650? Have a technical question? Click here!
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
-
- Posts: 13
- Joined: Thu Sep 28, 2017 3:34 am
Re: Where can I get my bolts?
What paste would you use?
I most likely have to order it online.
Is it only the HEAD bolts that is important to change ?
Gonna clean up and have a look at the valves also, so mart they need change/clean up or a little tap.
I most likely have to order it online.
Is it only the HEAD bolts that is important to change ?
Gonna clean up and have a look at the valves also, so mart they need change/clean up or a little tap.
Re: Where can I get my bolts?
I've not known it to be important to change the head bolts. As far as what "paste" to use, OEM Honda gaskets do not need any kind of sealant. I can't speak for other brands. If you want to put something on them, I would use Hondabond sealant. If you use any kind of silicone, you run the risk of pieces of it breaking loose and finding their way to important oil passageways, and clogging them up.
Have a problem with your CB650? Have a technical question? Click here!
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,
-
- Posts: 13
- Joined: Thu Sep 28, 2017 3:34 am
Re: Where can I get my bolts?
ah ok, thanks.
I guess I heard that it would be wise to change the bolt because of strec. But I guess it would be tight when I screw them together when I rebuild.
Thanks for reply.
I guess I heard that it would be wise to change the bolt because of strec. But I guess it would be tight when I screw them together when I rebuild.
Thanks for reply.
Return to “General Discussion”
Who is online
Users browsing this forum: No registered users and 38 guests