Stator issues/replacement

General motorcycle conversation

Moderators: Volker_P, tidd650

CPowell1994
Posts: 34
Joined: Wed Feb 14, 2018 8:51 am

Re: Stator issues/replacement

Postby CPowell1994 » Tue Feb 20, 2018 5:14 am

Thanks for the ideas. George, I'll try that this afternoon/evening when I get home. If I can't get anything accomplished, I'll just order a new case off eBay. Shouldn't be too much longer before it's on the road. :wink:
Loud pipes save lives. Pissing off everyone around you is just a bonus.

User avatar
GeorgeSweety
Posts: 462
Joined: Tue Aug 08, 2017 11:47 am
Location: UK.

Re: Stator issues/replacement

Postby GeorgeSweety » Tue Feb 20, 2018 6:03 am

I've never had a buggered up screw stay stuck with this method, it is a last resort that will destroy the screw head. Put your screwdriver blade in one of the flats of the crosshead +- so that you only have the smallest section of metal to notch, the remains of the crosshead is already notched, so to speak. Good Luck :D

CPowell1994
Posts: 34
Joined: Wed Feb 14, 2018 8:51 am

Re: Stator issues/replacement

Postby CPowell1994 » Tue Feb 20, 2018 7:39 am

Thanks man. I don't mind damaging it anymore at this point. I'll just replace it with a torx head or something a little more sturdy. I'll update when I get back to work on it this afternoon (bedtime for you :lol: )
Loud pipes save lives. Pissing off everyone around you is just a bonus.

CPowell1994
Posts: 34
Joined: Wed Feb 14, 2018 8:51 am

Re: Stator issues/replacement

Postby CPowell1994 » Fri Feb 23, 2018 9:20 am

Ordered a new stator cover. Comes with screws and all.
Loud pipes save lives. Pissing off everyone around you is just a bonus.

CPowell1994
Posts: 34
Joined: Wed Feb 14, 2018 8:51 am

Re: Stator issues/replacement

Postby CPowell1994 » Sun Feb 25, 2018 9:03 pm

Ended up actually cutting and drilling the screws out, but got the old stator out so that I could get to my brushes. New stator in the new cover ready to go as soon as I can get this old rotor wrestled off.
Attachments
IMG_20180225_131532.jpg
IMG_20180225_131532.jpg (3.54 MiB) Viewed 12858 times
Loud pipes save lives. Pissing off everyone around you is just a bonus.

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Stator issues/replacement

Postby Folsoml » Mon Feb 26, 2018 6:17 am

Use an air impact wrench. If you do not have access to one of those, get a long piece of pipe to slide over the handle of a heavy duty ratchet.

If you have trouble keeping it from turning the engine over instead of loosening the bolt, put the bike in 5th gear and slide something like another long piece of pipe into the spokes of the rear wheel. Carefully turn it until the pipe braces up against the swing arm.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

CPowell1994
Posts: 34
Joined: Wed Feb 14, 2018 8:51 am

Re: Stator issues/replacement

Postby CPowell1994 » Mon Feb 26, 2018 7:46 am

I should have clarified; I was able to get the bolt out with a breaker bar, but I can't get the rotor pulled. I've been trying a cheap gear puller, but it just gets so tight that it bows the arms and eventually pops off.
Loud pipes save lives. Pissing off everyone around you is just a bonus.

User avatar
GeorgeSweety
Posts: 462
Joined: Tue Aug 08, 2017 11:47 am
Location: UK.

Re: Stator issues/replacement

Postby GeorgeSweety » Mon Feb 26, 2018 8:38 am

CP, have a look at this viewtopic.php?t=4225

CPowell1994
Posts: 34
Joined: Wed Feb 14, 2018 8:51 am

Re: Stator issues/replacement

Postby CPowell1994 » Mon Feb 26, 2018 8:48 am

Thanks George. I watched and read elsewhere about using the rear axle, but didn't really want to remove and replace all that. I'm going to try to borrow a better puller from my dad (owns a shop) today. If that doesn't work out, I may have to breakdown and pull the rear axle. Wish I could figure out what the threading is on that axle so I could just buy a bolt to match.
Loud pipes save lives. Pissing off everyone around you is just a bonus.

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Stator issues/replacement

Postby Folsoml » Mon Feb 26, 2018 10:02 am

The rear axle is really the best way to go. It does not take that much to get it off.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

User avatar
GeorgeSweety
Posts: 462
Joined: Tue Aug 08, 2017 11:47 am
Location: UK.

Re: Stator issues/replacement

Postby GeorgeSweety » Mon Feb 26, 2018 10:10 am

CPowell1994 wrote:Thanks George. I watched and read elsewhere about using the rear axle, but didn't really want to remove and replace all that. I'm going to try to borrow a better puller from my dad (owns a shop) today. If that doesn't work out, I may have to breakdown and pull the rear axle. Wish I could figure out what the threading is on that axle so I could just buy a bolt to match.


I've got a spare one, just drop by my house and I'll lend it to you :lol: If your exhaust isn't in the way, you could just prop up your rear wheel and slide the axle out, do the job and slide it back in.

User avatar
Folsoml
Posts: 1634
Joined: Sat Apr 07, 2012 9:02 pm
Location: North Florida

Re: Stator issues/replacement

Postby Folsoml » Mon Feb 26, 2018 10:35 am

GeorgeSweety wrote:
CPowell1994 wrote:Thanks George. I watched and read elsewhere about using the rear axle, but didn't really want to remove and replace all that. I'm going to try to borrow a better puller from my dad (owns a shop) today. If that doesn't work out, I may have to breakdown and pull the rear axle. Wish I could figure out what the threading is on that axle so I could just buy a bolt to match.


I've got a spare one, just drop by my house and I'll lend it to you :lol: If your exhaust isn't in the way, you could just prop up your rear wheel and slide the axle out, do the job and slide it back in.



And if the exhaust is in the way, take off the top bolts for the shocks and lower the swingarm just enough to get that axle out.
Have a problem with your CB650? Have a technical question? Click here!


My Current Bikes: 2005 HD FLHTCUI Electra Glide Ultra Classic, 2007 Yamaha Vino,

bubbachicken
Posts: 368
Joined: Tue Nov 13, 2012 2:19 pm

Re: Stator issues/replacement

Postby bubbachicken » Tue Feb 27, 2018 8:11 pm

CPowell1994 wrote:Ended up actually cutting and drilling the screws out, but got the old stator out so that I could get to my brushes. New stator in the new cover ready to go as soon as I can get this old rotor wrestled off.


That sure is pretty!!!


Return to “General Discussion”

Who is online

Users browsing this forum: No registered users and 22 guests